«

Dear all,

Anybody has an experience how to redirect traffic to cache engine in this
case my is CacheFlow SG-800.
We have followed documentation by Cisco 3550 and WCCP on how-to and also
from Cacheflow for simple redirection. But it did not work for some reason.

Cacheflow did mention in their old websites ( b4 become BlueCoat) with this
configuration. I believe at that time they do it via
router as there is no L3 L4 switches at that time.

In CacheFlow Box create this config.
WCCP version 2 configuration file:

wccp enable
wccp version 2
service-group web-cache
home-router 10.1.1.1
interface 0
end


And in Cisco Router.

To configure WCCP version 2 standard redirection enter the following
commands from the CLI:

Router# configure terminal
Router(config)# ip wccp web-cache
Router(config)# interface serial 0/0
Router(config-if)# ip wccp web-cache redirect out

But we do not create this at our Cisco Cat3550EMI. We follow doc from Cisco
3550EMI and WCCP