Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > 2610 Firewall IOS won't NAT

Reply
Thread Tools

2610 Firewall IOS won't NAT

 
 
Chris G.
Guest
Posts: n/a
 
      07-15-2003
I have a 2621 loaded with c2600-io3-mz.123-1a.bin and I'm trying to set it
up as a firewall. I used the Cisco Config maker to make the initial config.
Once the router is loaded, it won't NAT. I even wiped out the config and put
a basic config in still won't NAT. Does this IOS support NAT?


 
Reply With Quote
 
 
 
 
Amazing
Guest
Posts: n/a
 
      07-15-2003
post the config....


"Chris G." <(E-Mail Removed)> wrote in message
news:6IIQa.16413$(E-Mail Removed)...
> I have a 2621 loaded with c2600-io3-mz.123-1a.bin and I'm trying to set it
> up as a firewall. I used the Cisco Config maker to make the initial

config.
> Once the router is loaded, it won't NAT. I even wiped out the config and

put
> a basic config in still won't NAT. Does this IOS support NAT?
>
>



 
Reply With Quote
 
 
 
 
Ravikumar Eswaran
Guest
Posts: n/a
 
      07-15-2003
Hi,

It should support NAT. BTW, is your router 2621XM or 2621? If its 2621XM, go for
new Security Device Manager (SDM).A new GUI to configure your access routers
with firewall, VPN etc..

www.cisco.com/go/sdm


Ravikumar

Amazing wrote:

> post the config....
>
> "Chris G." <(E-Mail Removed)> wrote in message
> news:6IIQa.16413$(E-Mail Removed)...
> > I have a 2621 loaded with c2600-io3-mz.123-1a.bin and I'm trying to set it
> > up as a firewall. I used the Cisco Config maker to make the initial

> config.
> > Once the router is loaded, it won't NAT. I even wiped out the config and

> put
> > a basic config in still won't NAT. Does this IOS support NAT?
> >
> >


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
instructions on how to perform an IOS upgrade on a Catalyst 6500 switch (IOS to IOS) Mike Rahl Cisco 1 05-30-2007 05:22 PM
Cisco 2610 - NAT Problems MrChen Cisco 2 10-08-2006 03:28 PM
IOS NAT (PAT) - dynamicstatic nat subnet mask spec Cisco 2 05-25-2006 06:11 PM
Correct IOS for 2610 & 2620 ADSL WIC support Watt Cisco 0 10-13-2005 01:29 PM
IOS version to support pppoe client on 2610 bricemason@hotmail.com Cisco 2 12-29-2004 03:20 PM



Advertisments