Linksys Router Incomplete DHCP Clients Table

If this isn't the appropriate newsgroup for this question, please let me
know if there's a better one (I can't find one for LinkSys).

I just replaced my old Microsoft MN-700 router with a LinkSys WRT54G and
have been happy with the improved signal strength.

When I review the active IP assignments, however, I find it incomplete. It
lists the two laptops and the desktop that are networked, but does NOT list
my TiVo (which was set up and connects with this) and also my Sony Clie
Handheld (which also connects). It appears that the IP numbers for these
devices were assigned by the Router (192.168.1.103 and 104, respectively,
which follow the 100, 101, and 102 the Router assigned to the PCs).

Does this list only recognize actual PC devices and not other networked
devices?

I used to use this list on my MS Router as a quick way to find IP addresses
for troubleshooting. Is there a better "complete list" for LinkSys?

Thanks and Happy Holidays.

Rob

Robert Stanley

http://www.broadbandreports.com/forum/linksys
http://www.linksysinfo.org/modules.php?name=Forums

--

Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual
benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no
rights...

"Robert Stanley" <> wrote in message
news:zcGdnX7vo9mwEDPeRVn-...
> If this isn't the appropriate newsgroup for this question, please let me
> know if there's a better one (I can't find one for LinkSys).
>
> I just replaced my old Microsoft MN-700 router with a LinkSys WRT54G and
> have been happy with the improved signal strength.
>
> When I review the active IP assignments, however, I find it incomplete. It
> lists the two laptops and the desktop that are networked, but does NOT
> list my TiVo (which was set up and connects with this) and also my Sony
> Clie Handheld (which also connects). It appears that the IP numbers for
> these devices were assigned by the Router (192.168.1.103 and 104,
> respectively, which follow the 100, 101, and 102 the Router assigned to
> the PCs).
>
> Does this list only recognize actual PC devices and not other networked
> devices?
>
> I used to use this list on my MS Router as a quick way to find IP
> addresses for troubleshooting. Is there a better "complete list" for
> LinkSys?
>
> Thanks and Happy Holidays.
>
> Rob
>

Sooner Al [MVP]