«

I'm looking at setting up a PIX Failover and having it plugged into the
other interface on the same Router that the Primary PIX is plugged
into. Since the router interfaces need to have different subnets my
question is...Can this be done? Or does a switch need to be between the
PIX's and the Router so they have the same subnet.

Router
/ \
/ \
Primer Failover
PIX PIX

Thanks in Advance!!!

You can add a switch or configure a bridge-group on the router so the
requirement of multiple segments on router interfaces is not there anymore.

Erik

"Greg" <> wrote in message
news: ups.com...
> I'm looking at setting up a PIX Failover and having it plugged into the
> other interface on the same Router that the Primary PIX is plugged
> into. Since the router interfaces need to have different subnets my
> question is...Can this be done? Or does a switch need to be between the
> PIX's and the Router so they have the same subnet.
>
> Router
> / \
> / \
> Primer Failover
> PIX PIX
>
> Thanks in Advance!!!
>