«

[ruchi]

Hi All,

I have been trying to configure Cisco Secure ACS for Windowsv3.2 with PEAP_MS_CHAPv2 Machine Authentication. I am able to install the certificate and configure PEAP Settings on the ACS. But when I try to Configure the Access Point as an AAA Client, ACS does not accept the AP information and gives the error " RADIUS key value must not be blank".

I am providing all the information i.e. AAA Client Hostname, AAA Client IP Address, Key and am selecting RADIUS(Cisco Aironet) in the Authentication using field.

I am using evaluation version of the ACS. Could this be the problem for the same or am I missing something else?

Thanks,
Ruchi