Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Re: PPP multilink synchronization

Reply
Thread Tools

Re: PPP multilink synchronization

 
 
Kana
Guest
Posts: n/a
 
      05-09-2006
Hi,
I have an issue with my PPP multilink setup which consist of 2
links (A & B). On my side a 7206VXR router is being used, while a 2600
series on the remote side. In a situation where link A goes down, the
other link B should be functioning without issues. But in this case,
whenever link A goes down, the B link becomes intermittent. Shutting
the local interface for link A did not have any effect.We solved the
issue by shutting the remote interface for Link A. Does anyone have any
idea on what could be wrong? Could it be related to IOS incompatibility
or misconfiguration issues?

Thanks,
Kanagaraj Krishna

 
Reply With Quote
 
 
 
 
Doug McIntyre
Guest
Posts: n/a
 
      05-09-2006
"Kana" <> writes:
> I have an issue with my PPP multilink setup which consist of 2
>links (A & B). On my side a 7206VXR router is being used, while a 2600
>series on the remote side. In a situation where link A goes down, the
>other link B should be functioning without issues. But in this case,
>whenever link A goes down, the B link becomes intermittent. Shutting
>the local interface for link A did not have any effect.We solved the
>issue by shutting the remote interface for Link A. Does anyone have any
>idea on what could be wrong? Could it be related to IOS incompatibility
>or misconfiguration issues?


I do that sort of setup all the time and haven't seen anything like
that happen. The T1s just drop out or come up as needed if they have
problems, and no loss in traffic is detected, just a reduction in
bandwidth available.

Post the relevant sections of your configs?




 
Reply With Quote
 
 
 
 
Merv
Guest
Posts: n/a
 
      05-09-2006
and post show version from both routers

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
multilink ppp only works with ppp multilink fragment disable (2 T-1s) Karnov Cisco 1 05-24-2004 02:37 AM
Multilink PPP Smash Cisco 10 01-13-2004 01:57 PM
many lost fragments on ppp-multilink connections Gerd Thuemmler Cisco 0 11-27-2003 07:54 AM
Re: ppp multilink on 2500/3600 Klaus Kruse Cisco 1 10-27-2003 08:00 PM
ppp multilink lost many fragments Gerd Thümmler Cisco 0 07-11-2003 08:05 AM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57