«

I have a Cisco 836 using :c836-k9o3y6-mz.122-11.YV.bin

Is there any way I can get from the modem itself a list of OID's it's
using

I'm trying to use mrtg to get the CPU load and i'm getting nothing
At the momnet I'm using
..1.3.6.1.4.1.9.9.109.1.1.1.1.3.1&1.3.6.1.4.1.9.9. 109.1.1.1.1.5.1


Also the flash has 12.3Mb is there any way of getting a newer IOS for
free


Many thanks in advance

SuperSlueth <> wrote:


> I'm trying to use mrtg to get the CPU load and i'm getting nothing
> At the momnet I'm using
> .1.3.6.1.4.1.9.9.109.1.1.1.1.3.1&1.3.6.1.4.1.9.9.1 09.1.1.1.1.5.1

I have a Cisco 877 and use the following MIB in the mrtg configfile

CPU:
Target[-----------.cpu]:1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:snm pblabla
MEMORY usage:
Target------------.mem]:1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1 .1.1.6.1:snmpstrinblabla

> Also the flash has 12.3Mb is there any way of getting a newer IOS for
> free

Sign up for a support contract Then you get it for free...

Why do you want to upgrade ?

Hans

Hi, I do know the 805's use the OLD-CISCO MIB for CPU.
THe MIB tree that CPU is in normally used for cricket/MRTG empty.

Dont know if the 877 however is now full Cisco IOS, since it can run
CEF

Check snmpling.org and use the online free browser and search for CPU.
You can just command line snmpwalk (NET-SNMP) the OIDs that you want
data to check if you get responses before putting into MRTG. Cacti is a
much better program.

Its even better than the Cisco MIB navigator (for registered users)

Jay