Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > UK VOIP > Voip POTS & VoIP Access from one phone Vigor2500V

Reply
Thread Tools

Voip POTS & VoIP Access from one phone Vigor2500V

 
 
¬Stephen Hammond
Guest
Posts: n/a
 
      02-23-2006
Is there anything like the VIgor 2500V which will plug into my lan port on
my current ADSL modem router
(http://www.homeplugshop.co.uk/acatal...lete_Kits.html) as I would like
to keep my homeplug modem router.

POTS & VoIP Access from one phone
In addition to the ADSL Line, the Vigor2500V connects to your regular
analogue phone line so with just a single phone on your desk, you can choose
to make calls using VoIP via the Internet or, by dialling *0 before the
call, switch over to your POTS line and dial out via the PSTN (the
conventional phone network - for example BT). Incoming calls can be received
from either source too - either POTS or VoIP - the phone will ring on
either. The Vigor2500V features automatic failover, so in the event of power
loss, the Vigor automatically switches your phone over to the POTS line so
that you can still make/receive calls. Additionally, if you have a VoIP
phone number (SIP Address) in the speed dial memory, you can also specify a
backup phone number for each entry, so in the event of Internet loss, the
router will automatically dial an alternative number via your regular
telephone line. In normal use, you can tell which line you are using by the
LED colour - green for VoIP and amber for POTS.


 
Reply With Quote
 
 
 
 
Martin˛
Guest
Posts: n/a
 
      02-24-2006
Zyxel 2602HWL can do that for two VoIP lines, but that is ofcourse all in
one ADSL/modem/router/wifi/VoIP.
Have look at Zyxel 2002L ATA, but I am not sure it has PSTN pass-through.
Regards,
Martin


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Connecting a POTS phone to modem without POTS port. Wim UK VOIP 2 12-17-2005 10:12 AM
Vigor2500V, soho voip router, from DrayTek. toshibauk@hotmail.com VOIP 0 05-03-2005 04:05 AM
DrayTek Vigor2500V, VoIP router with QoS function. ck cheng VOIP 0 01-06-2005 10:30 AM
(PBX)-pots<->vic-fxo-(cisco2600)-10baseT<->10baseT-(cisco ata-186)-FXS-pots? cyrus Cisco 0 11-24-2003 10:26 PM
pots-to-pots call transfer without tromboning using Cisco 2600 Per Cisco 1 07-21-2003 06:06 PM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57