Just Dial VOIP

For anyone interested just dial voip will work with thr Sipura 2000
support informed me when I asked that they could not tell me has they
had never tried using a Sipura but it does work ok .
Just kicked out 1899 and installed JD now with no problems .

dexter@blueyonder.co.uk

In message of Fri, 20 May 2005, writes
>For anyone interested just dial voip will work with thr Sipura 2000
>support informed me when I asked that they could not tell me has they
>had never tried using a Sipura but it does work ok .
>Just kicked out 1899 and installed JD now with no problems .

Thanks for that dexter, I've been dithering about getting a SPA3000 for
some while now. I think I'll now take the plunge.

David

<> wrote:

> For anyone interested just dial voip will work with thr Sipura 2000
> support informed me when I asked that they could not tell me has they
> had never tried using a Sipura but it does work ok .

What settings are you using on the Sipura?

--
The From address is a spam-trap, so all replies to the newsgroup please.

~~~~~~~~~~~~~~~ Be Alert, Your Country Needs More Lerts! ~~~~~~~~~~~~~~~

On Fri, 20 May 2005 19:38:09 +0100,
spam-egg-chips-n- (Dave Gill) wrote:

><> wrote:
>
>> For anyone interested just dial voip will work with thr Sipura 2000
>> support informed me when I asked that they could not tell me has they
>> had never tried using a Sipura but it does work ok .
>
>What settings are you using on the Sipura?
see Jpeg Dave set up line x on admin page then submit then go to INFO
page and submit again wait a few mins and all should be ok .

On Fri, 20 May 2005 19:38:09 +0100,
spam-egg-chips-n- (Dave Gill) wrote:

><> wrote:
>
>> For anyone interested just dial voip will work with thr Sipura 2000
>> support informed me when I asked that they could not tell me has they
>> had never tried using a Sipura but it does work ok .
>
>What settings are you using on the Sipura?
Sip server = justdial.com
outbound proxy = 82.110.16.193
Sip user ID = SIP username
Auth password = SIP password
Nat Traversal = No
STUN = leave blank
keep Alive interval = 20
Proxy-Require = com. nortelnetworks.firewall
After submiision GO TO INFO page AND SUBMIT AGAIN
otherwise it will not work .

Cheers!

I'd got most of the information, but didn't know what bit was for which
setting.

All working now.

--
The From address is a spam-trap, so all replies to the newsgroup please.

~~~~~~~~~~~~~~~ Be Alert, Your Country Needs More Lerts! ~~~~~~~~~~~~~~~

On Fri, 20 May 2005 20:43:53 +0100,
spam-egg-chips-n- (Dave Gill) wrote:

>Cheers!
>
>I'd got most of the information, but didn't know what bit was for which
>setting.
>
>All working now.
I did try to send you a screen capture David but this is not a binary
group so it was rejected sorry pleased you got it working ok anyway .

<> wrote:

> I did try to send you a screen capture David but this is not a binary
> group so it was rejected sorry pleased you got it working ok anyway .

Works fine on the Sipura, but I haven't found the right combination of
settings to get it running with X-Lite yet. :-/

--
The From address is a spam-trap, so all replies to the newsgroup please.

~~~~~~~~~~~~~~~ Be Alert, Your Country Needs More Lerts! ~~~~~~~~~~~~~~~

On Fri, 20 May 2005 22:21:25 +0100,
spam-egg-chips-n- (Dave Gill) wrote:

><> wrote:
>
>> I did try to send you a screen capture David but this is not a binary
>> group so it was rejected sorry pleased you got it working ok anyway .
>
>Works fine on the Sipura, but I haven't found the right combination of
>settings to get it running with X-Lite yet. :-/
Don't ask I ditched X-lite and Eyebeam when I bought my Supura's .