Cisco ATA 186 CallerID

Does anyone know what needs to be put in the CallerIDMethod for the Cisco
ATA to output CLID in UK format?

TheBoy

TheBoy wrote:
> Does anyone know what needs to be put in the CallerIDMethod for the
> Cisco ATA to output CLID in UK format?

What options have you got..?

Ivor

"Ivor Jones" <> wrote in message
news:...
> TheBoy wrote:
>> Does anyone know what needs to be put in the CallerIDMethod for the
>> Cisco ATA to output CLID in UK format?
>
> What options have you got..?
>
> Ivor
>

From the manual:

CallerID/DTMFMethod. Possible values are:

bit 0-1 (mask 0x3): method;
0=Bellcore, 1=DTMF, 2=ETSI, 3=FSK

bit 2 (mask 0x4): method type;
0=type1
1=type 2

if(method=0) {
bit 3-8 (mask 0x1f: max no. of digits
bit 9-14 (mask 0x7e00): max no. of chars
bit 15-20 (mask 0x1f8000): special chars
}
else {
bit 3-6 (mask 0x7: start digit
bit 7-10 (mask 0x780): end digit
bit 11 (mask 0x800): polarity reversal
bit 12-16 (mask 0x1f000): max no. of digits
}

- Sweden=0x0ff61

- Denmark=0x0fde1

- USA=0x19e60

TheBoy wrote:
> Does anyone know what needs to be put in the CallerIDMethod for the Cisco
> ATA to output CLID in UK format?

The ATA 186 doesn't support UK CID Format.

"duck" <> wrote in message
news:7qthe.32081$. uk...
> TheBoy wrote:
>> Does anyone know what needs to be put in the CallerIDMethod for the Cisco
>> ATA to output CLID in UK format?
>
> The ATA 186 doesn't support UK CID Format.

Thats annoying. You expect a premier product like Cisco to support UK
standards. Its not as if its a micky mouse far east brand - especially as
its running latest V3.2 firmware.