Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > VOIP > Trouble with CCME and VIC2-4FXO; IOS 12.4(3)

Reply
Thread Tools

Trouble with CCME and VIC2-4FXO; IOS 12.4(3)

 
 
alexander.burke@gmail.com
Guest
Posts: n/a
 
      09-30-2005
I'm having some trouble with a new CallManager Express setup.
Everything is working (phone-to-phone calls, and outgoing calls by
dialing 9 first) -- except incoming calls from the PSTN are not causing
either of the two phones to ring.

If someone more knowledgeable could take a peek and let me know where
I've gone wrong, that would be great!

Here are the relevant parts of my config. Thanks in advance!

!
!
voice-port 0/3/0
ring number 10
!!! Won't ever get to 10 rings, so this is safe
cptone CA
connection plar 6135551212
!!! I also tried with "connection plar 10" to no avail
caller-id enable
!
!
dial-peer voice 1001 pots
destination-pattern 9T
port 0/3/0
!
!
!
telephony-service
load 7960-7940 P00307020300
max-ephones 52
max-dn 192
ip source-address 10.0.0.1 port 2000
max-redirect 20
auto assign 1 to 2
timeouts interdigit 3
system message Cisco CallManager Express
time-zone 12
time-format 24
create cnf-files version-stamp 7960 Sep 29 2005 08:02:25
max-conferences 16 gain -6
moh flash:en_bacd_music_on_hold.au
web admin system name foobar password foobar
dn-webedit
time-webedit
transfer-system full-consult
!
!
ephone-dn 1 dual-line
number 101
label Extension 101
name Ext 101
!
!
ephone-dn 2 dual-line
number 102
label Extension 102
name Ext 102
!
!
ephone-dn 10
number 6135551212
name PSTN
!
!
ephone 1
mac-address DEAD.BEEF.BABE
type 7971
button 1:1 8:10
!
!
!
ephone 2
mac-address C0FF.EE00.BABE
type 7960
button 1:2 6:10
!
!

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
instructions on how to perform an IOS upgrade on a Catalyst 6500 switch (IOS to IOS) Mike Rahl Cisco 1 05-30-2007 05:22 PM
Trouble with CCME and VIC2-4FXO; IOS 12.4(9)T Vitthal Cisco 4 09-14-2006 05:12 AM
Forming H323 gateway between CCME and Avaya CLAN/MEDPRO ttripp@magnoliamanor.com Cisco 1 08-02-2006 04:30 PM
Trouble with CCME and VIC2-4FXO; IOS 12.4(3) alexander.burke@gmail.com Cisco 5 10-11-2005 07:01 AM
CCME JOF Cisco 2 09-07-2004 10:21 AM



Advertisments