«

Hello people,

does anyone here uses this "cheaper" boards
(http://www.digitnetworks.com/store/p...products_id=28)
for running asteriks?

Another question: Does a FXO hardware (like this
http://www.rubiconpbx.com/M1204_detail.htm) can be integrated with
asteriks?

Final question: Is not better to use a hardware instead of a pci
board? Hardware gives the option to work in case of a asteriks box
problem.

Thanks
Tony

Antonio wrote:
> Hello people,
>
> does anyone here uses this "cheaper" boards
> (http://www.digitnetworks.com/store/p...products_id=28)
> for running asteriks?
>
Yes. I use the digitnetworks board. It works perfectly. The only
issue I had was that the printed installation guide is different
than the guide on the CD. The CD users guide is correct.

Also on the CD is an Asterisk package.

> Another question: Does a FXO hardware (like this
> http://www.rubiconpbx.com/M1204_detail.htm) can be integrated with
> asteriks?
>
Don't know. If it is sip addressable (has a UAC & UAS) then I
assume it will work but I haven't tried it.

> Final question: Is not better to use a hardware instead of a pci
> board? Hardware gives the option to work in case of a asteriks box
> problem.
>
Better than what? I think this depends on your application. I use a
Dell server running Redhat and a digitnetworks card and it works
fine for the 20+ users on the system

> Thanks
> Tony