Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > VOIP > QSIG with CCM 3.2(2c)

Thread Tools

QSIG with CCM 3.2(2c)

Posts: n/a

I try to put in place a QSIG link between an Alcatel PABX 4400 R3.2
and a Cisco 2620 IOS 12.2(11)T9 with a E1 card 1MFT-E1 in a Network
Module NM-HDV.

Does this configuration support QSIG ECMA 165 (QSIG GF) ?

In the Cisco literature
, I read that the MC3810 can do that, so normaly it could be possible
for my platform ?

The purpose of my request is to display the caller name on the phone.
If my platform is not uptodate to do that, please can you provide me
the hardware and IOS levels requirements.

Just for information, I will not be able to buy a CCM 3.3 to fix my
fonctionality problem.

Thanks in advance

Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
ISDN Wont Accept and Transfer PSTN Calls To CCM "bad bearercap" (AS5350-CCM) anonyme VOIP 4 05-09-2008 04:55 PM
Callmanager to PBX - BRI qsig prophet VOIP 0 09-20-2006 01:21 PM
Decoding QSIG/Q931 FACILITY Messages Cisco 0 11-15-2005 04:29 PM
Re: Qsig on MGX's Alex Cisco 0 04-05-2004 08:45 AM
MWI between to Option 11 rel 25.40 and Cisco router running QSIG robert Cisco 0 02-12-2004 08:41 PM