Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > VOIP > outgoing dialpeer matching pb...

Reply
Thread Tools

outgoing dialpeer matching pb...

 
 
yaducam
Guest
Posts: n/a
 
      09-16-2003
Hi everyone!

I try to make a phone call from a PSTN phone to a SIP phone using
Cisco gateway 1760. Ans seems like i have some trouble on outgoing
peer-matching..

My PSTN phone number is 0247853784
The gateway has been assigned a ISDN phone number 0247889127 on BRI
2/0
and the IP 10.54.74.2 on the Fastethernet interface 0/0
My sip phone is a cisco 7940 on 10.54.74.20

Here are the dial-peers i use :

dial-peer voice 1 voip
application session
destination-pattern 9127
session protocol sipv2
session target ipv4:10.54.74.20:5060
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 2 pots
destination-pattern 247853784
no digit-strip
port 2/0
!

I try to phone my SIP phone dialing 0247889127 on my PSTN phone
This i what i get when debbuging dialpeer:

passTours#debug dialpeer
dialpeer detailed info debugging is on
passTours#
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
247853784
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
247853784
*Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
247853784
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
247853784
*Mar 12 00:02:52.736: dpAssociateIncomingPeer_T null source route
label
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
247853784
*Mar 12 00:02:52.736: Inside dpMatchCore:
*Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
247853784
*Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched

Seems like peer 2 (POTS) matched.. (i assume as an inbound dial-peer)
But peer 1 is not matched as an outgoing peer .. What's wrong ?

Some other debug info that maybe could help (I don't understand half
of them but maybe some gurus will ...) Should be an interesting part
by the area of " no matching node "

debug voip ccapi inout
------------------------
*Mar 12 00:12:10.606:
//-1/xxxxxxxxxxxx/CCAPI/ccTDConstructHashProfileTab:
profileTable[0x82085B70], numBuckets[11], numEntries[0]
*Mar 12 00:12:10.606:
//-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager: Invoking
necessary profileTable updaters...
*Mar 12 00:12:10.606:
//-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: Updating
profileTable[0x82085B70] with objects in container[0x82501878]
*Mar 12 00:12:10.606:
//-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: obtained
key[5] for the tag[6]
*Mar 12 00:12:10.606:
//-1/xxxxxxxxxxxx/CCAPI/ccTDPvtAddObjectToProfileBucket:
profileTable[0x82085B70], tdObject[0x8234C3EC]*Mar 12 00:12:10.606:
//-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager:
*Mar 12 00:12:10.610: ccTDUtilDumpAllElemInProfileTab:
profileTable[0x82085B70], numBuckets[11], numEntries[1]
*Mar 12 00:12:10.610: Bucket { 5 }
------>0x8234C3EC[0x0,t-6,l-16,d-0x8234C40C,m-1,u-951130,g-FACE0FFF]
*Mar 12 00:12:10.610:
*Mar 12 00:12:10.610:
//-1/xxxxxxxxxxxx/CCAPI/ccTDDestructTDUsrContainer:
Container[0x82501878]
*Mar 12 00:12:10.610: //-1/xxxxxxxxxxxx/CCAPI/cc_incr_if_call_volume:
not the VoIP or MMoIP
*Mar 12 00:12:10.610:
//-1/xxxxxxxxxxxx/CCAPI/cc_process_call_setup_ind: (event=0x823A5CCC)
*Mar 12 00:12:10.610:
//-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: matching
parameters - called# [9127], calling# [247853784], consultid []
*Mar 12 00:12:10.610:
//-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search: Searching for node
with called# [9127], calling# [247853784], consultid []
*Mar 12 00:12:10.610:
//-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: No matching
node
*Mar 12 00:12:10.614:
//124/0DCFADDC80D8/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed
cid 124 with tag 2 to app "DEFAULT"
*Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
ev(24=CC_EV_CALL_SETUP_IND), cid(124), disp(0)
*Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
ev(SSA_EV_CALL_SETUP_IND), cid(124), disp(0)
*Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/ssaCallSetupInd:
*Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
(callID=0x7C, context=0x825FCB3
*Mar 12 00:12:10.614: //124/0DCFADDC80D8/SSAPP:2:-1/ssaCallSetupInd:
cid(124), st(SSA_CS_MAPPING),oldst(0),
ev(24)ev->e.evCallSetupInd.nCallInfo.finalDestFlag = 0

And to finish here are other relevant info in my config:

interface FastEthernet0/0
ip address 10.54.74.2 255.255.255.128
no ip mroute-cache
speed auto
full-duplex
!
interface Serial0/0
no ip address
no ip mroute-cache
shutdown
!
interface BRI2/0
no ip address
isdn switch-type basic-net3
isdn incoming-voice voice
isdn sending-complete
!
interface BRI2/1
no ip address
no ip mroute-cache
isdn switch-type basic-net3
!
!
dial-peer cor custom
!
!
!
dial-peer voice 1 voip
application session
destination-pattern 9127
session protocol sipv2
session target ipv4:10.54.74.20:5060
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 2 pots
destination-pattern 247853784
no digit-strip
port 2/0
!

Thanks for reading since the end of this message !
 
Reply With Quote
 
 
 
 
Steve Blair
Guest
Posts: n/a
 
      09-16-2003

Do a "show dialplan number <IP phone number>" and see
which dial peer is matched.

yaducam wrote:
> Hi everyone!
>
> I try to make a phone call from a PSTN phone to a SIP phone using
> Cisco gateway 1760. Ans seems like i have some trouble on outgoing
> peer-matching..
>
> My PSTN phone number is 0247853784
> The gateway has been assigned a ISDN phone number 0247889127 on BRI
> 2/0
> and the IP 10.54.74.2 on the Fastethernet interface 0/0
> My sip phone is a cisco 7940 on 10.54.74.20
>
> Here are the dial-peers i use :
>
> dial-peer voice 1 voip
> application session
> destination-pattern 9127
> session protocol sipv2
> session target ipv4:10.54.74.20:5060
> dtmf-relay rtp-nte
> codec g711ulaw
> no vad
> !
> dial-peer voice 2 pots
> destination-pattern 247853784
> no digit-strip
> port 2/0
> !
>
> I try to phone my SIP phone dialing 0247889127 on my PSTN phone
> This i what i get when debbuging dialpeer:
>
> passTours#debug dialpeer
> dialpeer detailed info debugging is on
> passTours#
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> 247853784
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> 247853784
> *Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> 247853784
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> 247853784
> *Mar 12 00:02:52.736: dpAssociateIncomingPeer_T null source route
> label
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> 247853784
> *Mar 12 00:02:52.736: Inside dpMatchCore:
> *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> 247853784
> *Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched
>
> Seems like peer 2 (POTS) matched.. (i assume as an inbound dial-peer)
> But peer 1 is not matched as an outgoing peer .. What's wrong ?
>
> Some other debug info that maybe could help (I don't understand half
> of them but maybe some gurus will ...) Should be an interesting part
> by the area of " no matching node "
>
> debug voip ccapi inout
> ------------------------
> *Mar 12 00:12:10.606:
> //-1/xxxxxxxxxxxx/CCAPI/ccTDConstructHashProfileTab:
> profileTable[0x82085B70], numBuckets[11], numEntries[0]
> *Mar 12 00:12:10.606:
> //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager: Invoking
> necessary profileTable updaters...
> *Mar 12 00:12:10.606:
> //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: Updating
> profileTable[0x82085B70] with objects in container[0x82501878]
> *Mar 12 00:12:10.606:
> //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: obtained
> key[5] for the tag[6]
> *Mar 12 00:12:10.606:
> //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtAddObjectToProfileBucket:
> profileTable[0x82085B70], tdObject[0x8234C3EC]*Mar 12 00:12:10.606:
> //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager:
> *Mar 12 00:12:10.610: ccTDUtilDumpAllElemInProfileTab:
> profileTable[0x82085B70], numBuckets[11], numEntries[1]
> *Mar 12 00:12:10.610: Bucket { 5 }
> ------>0x8234C3EC[0x0,t-6,l-16,d-0x8234C40C,m-1,u-951130,g-FACE0FFF]
> *Mar 12 00:12:10.610:
> *Mar 12 00:12:10.610:
> //-1/xxxxxxxxxxxx/CCAPI/ccTDDestructTDUsrContainer:
> Container[0x82501878]
> *Mar 12 00:12:10.610: //-1/xxxxxxxxxxxx/CCAPI/cc_incr_if_call_volume:
> not the VoIP or MMoIP
> *Mar 12 00:12:10.610:
> //-1/xxxxxxxxxxxx/CCAPI/cc_process_call_setup_ind: (event=0x823A5CCC)
> *Mar 12 00:12:10.610:
> //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: matching
> parameters - called# [9127], calling# [247853784], consultid []
> *Mar 12 00:12:10.610:
> //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search: Searching for node
> with called# [9127], calling# [247853784], consultid []
> *Mar 12 00:12:10.610:
> //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: No matching
> node
> *Mar 12 00:12:10.614:
> //124/0DCFADDC80D8/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed
> cid 124 with tag 2 to app "DEFAULT"
> *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
> ev(24=CC_EV_CALL_SETUP_IND), cid(124), disp(0)
> *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
> ev(SSA_EV_CALL_SETUP_IND), cid(124), disp(0)
> *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/ssaCallSetupInd:
> *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
> (callID=0x7C, context=0x825FCB3
> *Mar 12 00:12:10.614: //124/0DCFADDC80D8/SSAPP:2:-1/ssaCallSetupInd:
> cid(124), st(SSA_CS_MAPPING),oldst(0),
> ev(24)ev->e.evCallSetupInd.nCallInfo.finalDestFlag = 0
>
> And to finish here are other relevant info in my config:
>
> interface FastEthernet0/0
> ip address 10.54.74.2 255.255.255.128
> no ip mroute-cache
> speed auto
> full-duplex
> !
> interface Serial0/0
> no ip address
> no ip mroute-cache
> shutdown
> !
> interface BRI2/0
> no ip address
> isdn switch-type basic-net3
> isdn incoming-voice voice
> isdn sending-complete
> !
> interface BRI2/1
> no ip address
> no ip mroute-cache
> isdn switch-type basic-net3
> !
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 1 voip
> application session
> destination-pattern 9127
> session protocol sipv2
> session target ipv4:10.54.74.20:5060
> dtmf-relay rtp-nte
> codec g711ulaw
> no vad
> !
> dial-peer voice 2 pots
> destination-pattern 247853784
> no digit-strip
> port 2/0
> !
>
> Thanks for reading since the end of this message !


 
Reply With Quote
 
 
 
 
yaducam
Guest
Posts: n/a
 
      09-17-2003
Thank Steve for ansewring so fast.

This is what i got with the dialplan checking :

passTours#show dialplan number 9127
Macro Exp.: 9127

VoiceOverIpPeer1
peer type = voice, information type = voice,
description = `',
tag = 1, destination-pattern = `9127',
answer-address = `', preference=0,
CLID Restriction = None
CLID Network Number = `'
CLID Second Number sent
source carrier-id = `', target carrier-id = `',
source trunk-group-label = `', target trunk-group-label = `',
numbering Type = `unknown'
group = 1, Admin state is up, Operation state is up,
incoming called-number = `', connections/maximum =
0/unlimited,
DTMF Relay = enabled,
modem transport = system,
huntstop = disabled,
in bound application associated: 'session'
out bound application associated: ''
dnis-map =
permission :both
incoming COR list:maximum capability
outgoing COR list:minimum requirement
Translation profile (Incoming):
Translation profile (Outgoing):
incoming call blocking:
translation-profile = `'
disconnect-cause = `no-service'
type = voip, session-target = `ipv4:10.54.74.20:5060',
technology prefix:
settle-call = disabled
ip media DSCP = ef, ip signaling DSCP = af31, UDP checksum =
disabled,
session-protocol = sipv2, session-transport = system, req-qos
= best-effort,
acc-qos = best-effort,
dtmf-relay = rtp-nte,
RTP dynamic payload type values: NTE = 101
Cisco: NSE=100, fax=96, fax-ack=97, dtmf=121, fax-relay=122
CAS=123, ClearChan=125, PCM switch over u-law=0,A-law=8
RTP comfort noise payload type = 19
fax rate = voice, payload size = 20 bytes
fax protocol = system
fax-relay ecm enable
fax NSF = 0xAD0051 (default)
codec = g711ulaw, payload size = 160 bytes,
Expect factor = 0, Icpif = 20,
Playout Mode is set to adaptive,
Initial 60 ms, Max 300 ms
Playout-delay Minimum mode is set to default, value 40 ms
Fax nominal 300 ms
Max Redirects = 1, signaling-type = cas,
VAD = disabled, Poor QOV Trap = disabled,
Source Interface = NONE
voice class sip url = system,
voice class sip rel1xx = system,
voice class perm tag = `'
Time elapsed since last clearing of voice call statistics
never
Connect Time = 0, Charged Units = 0,
Successful Calls = 0, Failed Calls = 0, Incomplete Calls = 0
Accepted Calls = 0, Refused Calls = 8,
Last Disconnect Cause is "1 ",
Last Disconnect Text is "unassigned number (1)",
Last Setup Time = 88524780.
Matched: 9127 Digits: 4
Target: ipv4:10.54.74.20:5060

It looks perfecly normal..
my Voip dial peer is matched as i expected when dialing 9127 .

But, still the debug voip ccapi shows:

> > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: matching
> > parameters - called# [9127], calling# [247853784], consultid []


I guess dial-peer 1 should be matched as an outgoing dial-peer .. I
wonder what's wrong with my config..
I can send further debug voip ccapi message if someone is an CISCO
expert in theses debug message (there is just a part of it in my first
mail).
I tried to understand by myself but tghe cisco debugging voip doc is
pretty ligth on this point..If someone has a more info then i would be
happy to take it ..


Steve Blair <(E-Mail Removed)> wrote in message news:<bk7kqr$55b3$(E-Mail Removed)>...
> Do a "show dialplan number <IP phone number>" and see
> which dial peer is matched.
>
> yaducam wrote:
> > Hi everyone!
> >
> > I try to make a phone call from a PSTN phone to a SIP phone using
> > Cisco gateway 1760. Ans seems like i have some trouble on outgoing
> > peer-matching..
> >
> > My PSTN phone number is 0247853784
> > The gateway has been assigned a ISDN phone number 0247889127 on BRI
> > 2/0
> > and the IP 10.54.74.2 on the Fastethernet interface 0/0
> > My sip phone is a cisco 7940 on 10.54.74.20
> >
> > Here are the dial-peers i use :
> >
> > dial-peer voice 1 voip
> > application session
> > destination-pattern 9127
> > session protocol sipv2
> > session target ipv4:10.54.74.20:5060
> > dtmf-relay rtp-nte
> > codec g711ulaw
> > no vad
> > !
> > dial-peer voice 2 pots
> > destination-pattern 247853784
> > no digit-strip
> > port 2/0
> > !
> >
> > I try to phone my SIP phone dialing 0247889127 on my PSTN phone
> > This i what i get when debbuging dialpeer:
> >
> > passTours#debug dialpeer
> > dialpeer detailed info debugging is on
> > passTours#
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > 247853784
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > 247853784
> > *Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > 247853784
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > 247853784
> > *Mar 12 00:02:52.736: dpAssociateIncomingPeer_T null source route
> > label
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > 247853784
> > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > 247853784
> > *Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched
> >
> > Seems like peer 2 (POTS) matched.. (i assume as an inbound dial-peer)
> > But peer 1 is not matched as an outgoing peer .. What's wrong ?
> >
> > Some other debug info that maybe could help (I don't understand half
> > of them but maybe some gurus will ...) Should be an interesting part
> > by the area of " no matching node "
> >
> > debug voip ccapi inout
> > ------------------------
> > *Mar 12 00:12:10.606:
> > //-1/xxxxxxxxxxxx/CCAPI/ccTDConstructHashProfileTab:
> > profileTable[0x82085B70], numBuckets[11], numEntries[0]
> > *Mar 12 00:12:10.606:
> > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager: Invoking
> > necessary profileTable updaters...
> > *Mar 12 00:12:10.606:
> > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: Updating
> > profileTable[0x82085B70] with objects in container[0x82501878]
> > *Mar 12 00:12:10.606:
> > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: obtained
> > key[5] for the tag[6]
> > *Mar 12 00:12:10.606:
> > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtAddObjectToProfileBucket:
> > profileTable[0x82085B70], tdObject[0x8234C3EC]*Mar 12 00:12:10.606:
> > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager:
> > *Mar 12 00:12:10.610: ccTDUtilDumpAllElemInProfileTab:
> > profileTable[0x82085B70], numBuckets[11], numEntries[1]
> > *Mar 12 00:12:10.610: Bucket { 5 }
> > ------>0x8234C3EC[0x0,t-6,l-16,d-0x8234C40C,m-1,u-951130,g-FACE0FFF]
> > *Mar 12 00:12:10.610:
> > *Mar 12 00:12:10.610:
> > //-1/xxxxxxxxxxxx/CCAPI/ccTDDestructTDUsrContainer:
> > Container[0x82501878]
> > *Mar 12 00:12:10.610: //-1/xxxxxxxxxxxx/CCAPI/cc_incr_if_call_volume:
> > not the VoIP or MMoIP
> > *Mar 12 00:12:10.610:
> > //-1/xxxxxxxxxxxx/CCAPI/cc_process_call_setup_ind: (event=0x823A5CCC)
> > *Mar 12 00:12:10.610:
> > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: matching
> > parameters - called# [9127], calling# [247853784], consultid []
> > *Mar 12 00:12:10.610:
> > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search: Searching for node
> > with called# [9127], calling# [247853784], consultid []
> > *Mar 12 00:12:10.610:
> > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: No matching
> > node
> > *Mar 12 00:12:10.614:
> > //124/0DCFADDC80D8/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed
> > cid 124 with tag 2 to app "DEFAULT"
> > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
> > ev(24=CC_EV_CALL_SETUP_IND), cid(124), disp(0)
> > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
> > ev(SSA_EV_CALL_SETUP_IND), cid(124), disp(0)
> > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/ssaCallSetupInd:
> > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
> > (callID=0x7C, context=0x825FCB3
> > *Mar 12 00:12:10.614: //124/0DCFADDC80D8/SSAPP:2:-1/ssaCallSetupInd:
> > cid(124), st(SSA_CS_MAPPING),oldst(0),
> > ev(24)ev->e.evCallSetupInd.nCallInfo.finalDestFlag = 0
> >
> > And to finish here are other relevant info in my config:
> >
> > interface FastEthernet0/0
> > ip address 10.54.74.2 255.255.255.128
> > no ip mroute-cache
> > speed auto
> > full-duplex
> > !
> > interface Serial0/0
> > no ip address
> > no ip mroute-cache
> > shutdown
> > !
> > interface BRI2/0
> > no ip address
> > isdn switch-type basic-net3
> > isdn incoming-voice voice
> > isdn sending-complete
> > !
> > interface BRI2/1
> > no ip address
> > no ip mroute-cache
> > isdn switch-type basic-net3
> > !
> > !
> > dial-peer cor custom
> > !
> > !
> > !
> > dial-peer voice 1 voip
> > application session
> > destination-pattern 9127
> > session protocol sipv2
> > session target ipv4:10.54.74.20:5060
> > dtmf-relay rtp-nte
> > codec g711ulaw
> > no vad
> > !
> > dial-peer voice 2 pots
> > destination-pattern 247853784
> > no digit-strip
> > port 2/0
> > !
> >
> > Thanks for reading since the end of this message !

 
Reply With Quote
 
yaducam
Guest
Posts: n/a
 
      09-17-2003
Noise pb in interconnecting cisco SIP phone 7960 and ISDN phone
througth 7560-V gateway

Hi, i follow up my own post..

I succeded in making a call between my PSTN and Sip phone..
I just add direct-in-dial instruction in my POTS dial-peer.
I Don't really understand why it helps because according to what i
understood in cisco doc:
DID peers collect all the digits dialed in one stage
non DID peers collect the info digit-by-digit

At the end the pattern will be the same and so should match dial-peer
2 in both case

Moreover the pots dial-peer was correctly matched so i was expecting
something was going wrong in the matching process of my voip dial-peer
...

Does anybody can enligth me on this point ?

Now i'm experiencing a new pb:

There are a lot of noise on my communication..
I have to precise that communication between 2 SIP agents is good
quality
Same as comm between 2 PSTN phone.
And the problem is not due to overcharged network traffic,
communication is not delayed.

Seems like the gateway is somehow misconfigured and doesn't cancel the
noise
Does anybody know anything about this? On what setting should i play?

I use G711ulaw codec for my SIP comm.
And i don't know anything about french ISDN (RNIS) coding technic..
If any doc on this point then i take..

Thanks in advance

http://www.velocityreviews.com/forums/(E-Mail Removed) (yaducam) wrote in message news:<(E-Mail Removed). com>...
> Thank Steve for ansewring so fast.
>
> This is what i got with the dialplan checking :
>
> passTours#show dialplan number 9127
> Macro Exp.: 9127
>
> VoiceOverIpPeer1
> peer type = voice, information type = voice,
> description = `',
> tag = 1, destination-pattern = `9127',
> answer-address = `', preference=0,
> CLID Restriction = None
> CLID Network Number = `'
> CLID Second Number sent
> source carrier-id = `', target carrier-id = `',
> source trunk-group-label = `', target trunk-group-label = `',
> numbering Type = `unknown'
> group = 1, Admin state is up, Operation state is up,
> incoming called-number = `', connections/maximum =
> 0/unlimited,
> DTMF Relay = enabled,
> modem transport = system,
> huntstop = disabled,
> in bound application associated: 'session'
> out bound application associated: ''
> dnis-map =
> permission :both
> incoming COR list:maximum capability
> outgoing COR list:minimum requirement
> Translation profile (Incoming):
> Translation profile (Outgoing):
> incoming call blocking:
> translation-profile = `'
> disconnect-cause = `no-service'
> type = voip, session-target = `ipv4:10.54.74.20:5060',
> technology prefix:
> settle-call = disabled
> ip media DSCP = ef, ip signaling DSCP = af31, UDP checksum =
> disabled,
> session-protocol = sipv2, session-transport = system, req-qos
> = best-effort,
> acc-qos = best-effort,
> dtmf-relay = rtp-nte,
> RTP dynamic payload type values: NTE = 101
> Cisco: NSE=100, fax=96, fax-ack=97, dtmf=121, fax-relay=122
> CAS=123, ClearChan=125, PCM switch over u-law=0,A-law=8
> RTP comfort noise payload type = 19
> fax rate = voice, payload size = 20 bytes
> fax protocol = system
> fax-relay ecm enable
> fax NSF = 0xAD0051 (default)
> codec = g711ulaw, payload size = 160 bytes,
> Expect factor = 0, Icpif = 20,
> Playout Mode is set to adaptive,
> Initial 60 ms, Max 300 ms
> Playout-delay Minimum mode is set to default, value 40 ms
> Fax nominal 300 ms
> Max Redirects = 1, signaling-type = cas,
> VAD = disabled, Poor QOV Trap = disabled,
> Source Interface = NONE
> voice class sip url = system,
> voice class sip rel1xx = system,
> voice class perm tag = `'
> Time elapsed since last clearing of voice call statistics
> never
> Connect Time = 0, Charged Units = 0,
> Successful Calls = 0, Failed Calls = 0, Incomplete Calls = 0
> Accepted Calls = 0, Refused Calls = 8,
> Last Disconnect Cause is "1 ",
> Last Disconnect Text is "unassigned number (1)",
> Last Setup Time = 88524780.
> Matched: 9127 Digits: 4
> Target: ipv4:10.54.74.20:5060
>
> It looks perfecly normal..
> my Voip dial peer is matched as i expected when dialing 9127 .
>
> But, still the debug voip ccapi shows:
>
> > > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: matching
> > > parameters - called# [9127], calling# [247853784], consultid []

>
> I guess dial-peer 1 should be matched as an outgoing dial-peer .. I
> wonder what's wrong with my config..
> I can send further debug voip ccapi message if someone is an CISCO
> expert in theses debug message (there is just a part of it in my first
> mail).
> I tried to understand by myself but tghe cisco debugging voip doc is
> pretty ligth on this point..If someone has a more info then i would be
> happy to take it ..
>
>
> Steve Blair <(E-Mail Removed)> wrote in message news:<bk7kqr$55b3$(E-Mail Removed)>...
> > Do a "show dialplan number <IP phone number>" and see
> > which dial peer is matched.
> >
> > yaducam wrote:
> > > Hi everyone!
> > >
> > > I try to make a phone call from a PSTN phone to a SIP phone using
> > > Cisco gateway 1760. Ans seems like i have some trouble on outgoing
> > > peer-matching..
> > >
> > > My PSTN phone number is 0247853784
> > > The gateway has been assigned a ISDN phone number 0247889127 on BRI
> > > 2/0
> > > and the IP 10.54.74.2 on the Fastethernet interface 0/0
> > > My sip phone is a cisco 7940 on 10.54.74.20
> > >
> > > Here are the dial-peers i use :
> > >
> > > dial-peer voice 1 voip
> > > application session
> > > destination-pattern 9127
> > > session protocol sipv2
> > > session target ipv4:10.54.74.20:5060
> > > dtmf-relay rtp-nte
> > > codec g711ulaw
> > > no vad
> > > !
> > > dial-peer voice 2 pots
> > > destination-pattern 247853784
> > > no digit-strip
> > > port 2/0
> > > !
> > >
> > > I try to phone my SIP phone dialing 0247889127 on my PSTN phone
> > > This i what i get when debbuging dialpeer:
> > >
> > > passTours#debug dialpeer
> > > dialpeer detailed info debugging is on
> > > passTours#
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > > 247853784
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > > 247853784
> > > *Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > > 247853784
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > > 247853784
> > > *Mar 12 00:02:52.736: dpAssociateIncomingPeer_T null source route
> > > label
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 9127 expanded string: 9127
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > > 247853784
> > > *Mar 12 00:02:52.736: Inside dpMatchCore:
> > > *Mar 12 00:02:52.736: destination pattn: 247853784 expanded string:
> > > 247853784
> > > *Mar 12 00:02:52.736: MatchNextPeer: Peer 2 matched
> > >
> > > Seems like peer 2 (POTS) matched.. (i assume as an inbound dial-peer)
> > > But peer 1 is not matched as an outgoing peer .. What's wrong ?
> > >
> > > Some other debug info that maybe could help (I don't understand half
> > > of them but maybe some gurus will ...) Should be an interesting part
> > > by the area of " no matching node "
> > >
> > > debug voip ccapi inout
> > > ------------------------
> > > *Mar 12 00:12:10.606:
> > > //-1/xxxxxxxxxxxx/CCAPI/ccTDConstructHashProfileTab:
> > > profileTable[0x82085B70], numBuckets[11], numEntries[0]
> > > *Mar 12 00:12:10.606:
> > > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager: Invoking
> > > necessary profileTable updaters...
> > > *Mar 12 00:12:10.606:
> > > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: Updating
> > > profileTable[0x82085B70] with objects in container[0x82501878]
> > > *Mar 12 00:12:10.606:
> > > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtUpdateProfileTabFromContainer: obtained
> > > key[5] for the tag[6]
> > > *Mar 12 00:12:10.606:
> > > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtAddObjectToProfileBucket:
> > > profileTable[0x82085B70], tdObject[0x8234C3EC]*Mar 12 00:12:10.606:
> > > //-1/xxxxxxxxxxxx/CCAPI/ccTDPvtProfileTableBuildManager:
> > > *Mar 12 00:12:10.610: ccTDUtilDumpAllElemInProfileTab:
> > > profileTable[0x82085B70], numBuckets[11], numEntries[1]
> > > *Mar 12 00:12:10.610: Bucket { 5 }
> > > ------>0x8234C3EC[0x0,t-6,l-16,d-0x8234C40C,m-1,u-951130,g-FACE0FFF]
> > > *Mar 12 00:12:10.610:
> > > *Mar 12 00:12:10.610:
> > > //-1/xxxxxxxxxxxx/CCAPI/ccTDDestructTDUsrContainer:
> > > Container[0x82501878]
> > > *Mar 12 00:12:10.610: //-1/xxxxxxxxxxxx/CCAPI/cc_incr_if_call_volume:
> > > not the VoIP or MMoIP
> > > *Mar 12 00:12:10.610:
> > > //-1/xxxxxxxxxxxx/CCAPI/cc_process_call_setup_ind: (event=0x823A5CCC)
> > > *Mar 12 00:12:10.610:
> > > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: matching
> > > parameters - called# [9127], calling# [247853784], consultid []
> > > *Mar 12 00:12:10.610:
> > > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search: Searching for node
> > > with called# [9127], calling# [247853784], consultid []
> > > *Mar 12 00:12:10.610:
> > > //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup: No matching
> > > node
> > > *Mar 12 00:12:10.614:
> > > //124/0DCFADDC80D8/CCAPI/cc_process_call_setup_ind: >>>>CCAPI handed
> > > cid 124 with tag 2 to app "DEFAULT"
> > > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
> > > ev(24=CC_EV_CALL_SETUP_IND), cid(124), disp(0)
> > > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/sess_appl:
> > > ev(SSA_EV_CALL_SETUP_IND), cid(124), disp(0)
> > > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/SSAPP:-1:-1/ssaCallSetupInd:
> > > *Mar 12 00:12:10.614: //124/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
> > > (callID=0x7C, context=0x825FCB3
> > > *Mar 12 00:12:10.614: //124/0DCFADDC80D8/SSAPP:2:-1/ssaCallSetupInd:
> > > cid(124), st(SSA_CS_MAPPING),oldst(0),
> > > ev(24)ev->e.evCallSetupInd.nCallInfo.finalDestFlag = 0
> > >
> > > And to finish here are other relevant info in my config:
> > >
> > > interface FastEthernet0/0
> > > ip address 10.54.74.2 255.255.255.128
> > > no ip mroute-cache
> > > speed auto
> > > full-duplex
> > > !
> > > interface Serial0/0
> > > no ip address
> > > no ip mroute-cache
> > > shutdown
> > > !
> > > interface BRI2/0
> > > no ip address
> > > isdn switch-type basic-net3
> > > isdn incoming-voice voice
> > > isdn sending-complete
> > > !
> > > interface BRI2/1
> > > no ip address
> > > no ip mroute-cache
> > > isdn switch-type basic-net3
> > > !
> > > !
> > > dial-peer cor custom
> > > !
> > > !
> > > !
> > > dial-peer voice 1 voip
> > > application session
> > > destination-pattern 9127
> > > session protocol sipv2
> > > session target ipv4:10.54.74.20:5060
> > > dtmf-relay rtp-nte
> > > codec g711ulaw
> > > no vad
> > > !
> > > dial-peer voice 2 pots
> > > destination-pattern 247853784
> > > no digit-strip
> > > port 2/0
> > > !
> > >
> > > Thanks for reading since the end of this message !

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
thunderbird IMAP outgoing problem mr Firefox 2 05-24-2011 09:11 PM
Help with Pattern matching. Matching multiple lines from while reading from a file. Bobby Chamness Perl Misc 2 05-03-2007 06:02 PM
Dialpeer question for CCME Christine Cisco 0 08-10-2006 01:29 PM
How to wrap line length of outgoing messages? Randy Firefox 3 07-14-2004 06:28 PM
Pattern matching : not matching problem Marc Bissonnette Perl Misc 9 01-13-2004 05:52 PM



Advertisments