June 9-11, 2005
FIRST CALL FOR PAPERS
INDUSTRIAL SIMULATION CONFERENCE 2005
Modelling And Analysis Methodology
Discrete Event Simulation Languages and Tools
Simulation in Manufacturing
Simulation in Automotive Systems
Simulation in Robotics
Simulation in Electronics, Computers and Telecom
Simulation in Logistics, Traffic, Transport and Harbour Simulation
Complex Systems Modelling
Simulation in Aerospace
Simulation in Industrial and Product Design
Simulation in Engineering Processes
Simulation in Energy and Power Systems
Simulation in Multibody Systems
Simulation in Chemical and Petroleum Engineering
Simulation in Military and Defence
Verification, Validation and Accreditation
Virtual Reality and Graphical Simulations in Industrial Applications
The Future of Industrial Simulation
Modelling and Simulation in the Textile Industry
Intelligent Transport Systems
Information Systems, Logistics and Supply Chains
Student Papers, Poster Sessions
Partners for Projects Sessions
The European Technology Institute
and Sponsored by
The Fraunhofer Institute
For latest information see:
AIM OF ISC'2005
The Industrial Simulation Conference 2005 (ISC-2005) is the third annual international Simulation conference, which aims to give a complete overview of industrial simulation related research and to provide an annual status report on present day industrial simulation research for the EuropeanCommunity and the rest of the world. With the integration of artificial intelligence, agents and other modelling techniques, simulation has become an effective and appropriate decision support tool, as well. The exchange of techniques and ideas among universities and industry, which supportthe integration of simulation in the everyday workplace, is the basic premise at the heart of ISC-2005. ISC'2005 consists of four major parts. Apart concerns itself with simulation methodology, another with simulation applications, then there are the workshops, the exhibition and last butnot least the poster sessions for students.
The methodologies section covers: Modelling and Analysis Methodologies, Languages and Tools, Artificial Intelligence, Knowledge Based Simulation, Virtual Reality, Synthetic Environments, Petri Nets and Performance Analysis related to industrial applications
Web Based Simulation, Optimization and Response Surfaces, Parallel and Distributed Systems, Virtual Worlds, Methods for Special Applications, Practice, Extensions, XML, Open Source, Model Development, Network Modelling,Distributed Simulation and Industry, Modelling Very Large Scale Systems,Aerospace Operations, Revising Simulations Components
Advanced Input Modelling, Simulation Optimization, Cross Entropy, Output Analysis, Input Modelling, Simulation Optimization, Input Analysis, Difficult Queering Problems, New Output Analysis
DISCRETE SIMULATION LANGUAGES AND TOOLS
Discrete simulation languages; Object oriented modelling languages; UML and simulation; Model libraries and modularity; Component-oriented simulation; Special simulation tools and environments; Meta-models and automaticmodel generation; Graphical simulation environments and simulation software tools; Intelligent simulation environments; Database management of models and results; Java and Web enabled simulations, UML and OO Simulation.
The application section covers: Automation, CAD/CAM/CAE, Defence Electronics, Design Automation, Simulation in industrial Design, Industrial Engineering, Industrial and Process Simulation, Manufacturing, Simulations, Logistics and Transport, Power Plants, Multibody Systems, Aerospace, etc...
SIMULATION IN MANUFACTURING
The goal of this track is to exchange ideas, experiences, and research results between practitioners and researchers. It shall offer the opportunity not only for presenting work done but also for discussing new challenges emerging in this area. It focuses on innovative applications of simulation in the field of production and operation management. State-of-the-art applications covering any part of the value adding chain and any aggregation level are encouraged. This track will show the efficient utilization of simulation techniques and hybrid approaches for the optimization of manufacturing processes.
This session covers: Computer Assisted Learning and Simulation Trainers, Customizing of ERP Systems using Simulation, Distributed Simulation Approaches, Hierarchical Simulation, Integrating Process Mapping and Simulation, Manufacturing Consulting, Manufacturing Controls, Model Integration Standards Optimization and Evaluation, Simulation Frameworks, Simulation of(Manufacturing) Processes in Virtual Enterprises, Virtual Factories, andVirtual Manufacturing Simulation Support Tools , Web-Based Workflow Modelling and Simulation , MRP systems; CAD; CAM; CIM; Process design; Process control; Embedded intelligent control systems; Scheduling; Automotive simulation; Robotics and automation. Manufacturing Applications Transportation and Material Handling, Best Modelling Methods, Integrating Simulation and Design, Manufacturing Modeling Architectures, Manufacturing Modeling Methods, Simulation of Manufacturing Operations
SIMULATION IN AUTOMOTIVE SYSTEMS
Automotive simulation of Card Design, car behaviour, vehicle driver interaction, collision tests, vision enhancement and collision warning systems, vehicle dynamics and simulation, off-road vehicle design and modelling,drive train
SIMULATION IN ROBOTICS
Application of Industrial Robots, Service Robots, Control Technology, Development of Mechatronic Products, Innovation Management. Sensor Simulation , Simulation of Natural Environments Simulation of Agent-Environment Interaction /Intelligent Agents, Neural Networks and Simulation , Simulation of Collective Behaviour and Emergent Phenomena , Simulation of Learningand Adaptation Processes , Assessment Criteria and Assessment Methods for Simulators , Quantitative and Qualitative Comparisons between Originalsand their Simulations , Simulation of User-System Interaction
Robots in Assembly Systems
Assembly Systems and Components, Processes Product Development and Design, Wiring Technology
Robots in Technical Production Planning
Technical Production Planning, Device and Equipment Technology, Production processes and Sequences, Information Technology
SIMULATION IN ELECTRONICS, COMPUTERS AND TELECOM
Modeling and simulation of analogue circuits; Modeling and simulation of digital circuits at switch and/or at logic level; Hardware accelerators for circuit-level simulation; Hardware accelerators for logic simulation; Distributed simulation of circuits, components, and systems; Modeling andsimulation of computer systems; Fault simulation; Parallel and distributed systems; High-speed networks; Network simulation software; Computer and telecommunication systems; Telecommunication devices and systems; Intelligent telecommunication networks; ISDN; ATM communications.
SIMULATION IN ELECTRONICS MANUFACTURING
(Wafer Fabrication, Material Handling, Scheduling and Dispatching, Modeling Methodology, Computer Aided Test and test Pattern Generation, High Level Synthesis and Technology Mapping, Semi Custom and Reconfigurable VLSI Analysis, Design for Testability, Simulation Algorithms, High Level Desciprtion and Verification Languages, ASIC Design Techniques and Applications, VHDL and Design Design Methodologies, Fault Design and Testability Analysis, Microelectronics and CIM, Mixed Analogue/Digital VLSI)
(Cleanroom suitability test, microsystem technology, cleaning technology,manufacturing technology for clean environments, information systems)
Manufacturing Technologies, Information Technology
(Information Processing, Metrology and Testing Technology, Production Methods, Rapid Prototyping) -
(Development, optimisation and modelling of coating processes, integratedprocess development and management, production-orientated equipment, development, integration of coating processes into production, quality concepts for complex coating processes, surface characterization)
, Simulation Based Scheduling, (Supply Chain Planning Semiconductor Manufacturing, Maintenance and Repair, Scheduling and Control and Schedule Evaluation)
SIMULATION IN LOGISTICS, TRAFFIC, TRANSPORT AND HARBOUR SIMULATION
Factory and Logistics Planning
Strategies and Concepts for Production and Logistics, Technical and Organizations Planning of Production and Logistics Systems, Value Stream Mapping, Integrated Factory and Logistics Planning, Innovative Planning Methods, tools and systems
Logistics: logistics supply chains, inbound logistics, materials management, Manufacturing Supply Chain Management, physical distribution, production planning and control, outbound and inbound logistics, Simulation of regional logistic systems, distribution centres, inventory management, warehousing decisions, materials management, handling and packaging, logistics information systems, information management in logistics systems, logistics network design and facility location, cost modeling, information systems (networked Manufacturing, Enterprise design and Control, etc…)
Traffic: traffic flows, multi-modal systems, transit, transportation modes, urban city transport, transportation in logistics, transportation management, traffic demand, traffic control, traffic telematics, traffic performance, safety, macroscopic, mesoscopic and microscopic simulations;
Harbour Simulation (Bulk Terminals, Container Terminals, Harbour Services, Industrial Facilities, Navigation Lines, Multimodal Transports, Oil Terminals, Passenger Terminals, Railways, Ro-Ro Terminals, Ships and Platforms, Supply Chains and Warehouses, Harbour Management, Safety in Maritime Environments, Vessel Traffic Systems)
COMPLEX SYSTEMS MODELLING
(- Design and Simulation, - Process Control and Optimisation, - Information Technology Systems, - Space and Airborne Systems - Communication Networks, - Cybernetics and Control, - Building Engineering and Urban Infrastructures - Nonlinear Systems) Integration of AI Techniques and Simulation,Knowledge Elicitation and Representation for Complex Models, Drawing Understanding and Pattern Recognition, Machine Learning, Neural Networks andGenetic Algorithms, Simulation in Robotics and Automation, Continuous Simulation of Technical Processes, Fuzzy Models in Simulation, Wireless Communication, Mobile Communication Networks, Satellite Communication, LAN and WAN Protocols, Simulation of Switching Equipment, Design and Coding ofCommunication Handling Software
SIMULATION IN AEROSPACE
Low Costs Simulation Environments, Rapid Simulation Prototyping, Simulation Based Design, Simulation of Satellite Navigation, systems (space segment and terrestrial applications) simulation of satellite constellations, real-time hardware-in-the-loop nab-in-the-loop simulation, flight simulation, distributed interactive simulation and HLA standards, Graphical simulation (virtual environments and virtual reality) applied to aerospace. Modelling and Simulation standards, rationalisation efforts, repositories and reuse. Simulation in support of system specification and design, simulation in support of system assembly, integration and testing. Simulationin support of flight software validation
SIMULATION IN INDUSTRIAL PRODUCT DESIGN
Simulation of product design; Planning and control; Reconfigurable responsive computing and process re-engineering; Integrated product and processmodelling; Modelling and simulation in virtual global enterprises; Simulation based design; Qualitative and fuzzy modelling and simulation in engineering design; Modal logistics in systems design; Simulation in supportof system specification and design.
SIMULATION IN ENGINEERING PROCESSES
The Modelling in Engineering Processes track focuses on the application of simulation in mechanical and structural engineering. Oscilations and Waves, Stability and Control, Computational Mechanics, Numerical Analysis, Mathematical Methods in Engineering Sciences, Optimization Advanced simulation of dynamic systems, Simulation-based design, Qualitative modelling and simulation in engineering, Fuzzy modelling and simulation, Evolutionary synthesis and evolutionary methods in design, Rapid prototyping, CASE systems in engineering design, Modal Logic systems in design, Simulation in support of system specification and design, Construction Engineering and Project Management
SIMULATION IN ENERGY AND POWER SYSTEMS
Simulators: Real-Time simulation methods, GUI, Advanced modelling tools, Trainees' performance evaluation, Simulator Projects Simulation Studies: Simulation during design, Safety and environmental hazard estimation, Production optimisation. Methodology: Real-time simulation and visualisationtools, Parallel and distributed simulation
SIMULATION IN MULTIBODY SYSTEMS
General: FE-Methods and Modelling of Flexible Bodies, Non-holonomic Systems and Geometrical Concepts in Multibody Dynamics, Numerical Aspects of Multibody Dynamics , Optimization and Control of Mechanisms , Articulated and Telescopic Multibody Systems , Air, Land and Sea Multibody Systems Applications
Special Sessions on: Multibody Systems in Space: Flexible Body Systems, Orbital Injection, Satellite Injection, Rendezvous and Docking of Spacecraft, Simulation of Space Station Construction and Assembly
SIMULATION IN CHEMICAL AND PETROLEUM ENGINEERING AND THE MINING INDUSTRY
Simulation of Chemical Plants, Flow simulation, Plant control systems, network simulation, geological simulations, drilling simulations, oil transport simulations.
SIMULATION IN MILITARY AND DEFENSE
Military simulation - fidelity, exercise management, tools and modelling techniques, applications; Local, global, real and non-real time simulations, applications and results; Web-enabled simulation, local and remote invocation, GUI- advanced modelling tools, education; Simulators - hardware/persons-in-the-loop, HLA compliance; Animated visualisation of simulation; Component-oriented simulation. Massively Parallel Computing Techniques, Distributed Simulation, Synthetic Environments, Embedded Simulation, Networked Simulation and Interoperability, Campaign Analysis, Unmanned Aerial Vehicles, Logistics, Agents Modelling, Weapon and Communication Systems, Footmen, Dogs and Robots, C4I and Military Applications
VERIFICATION, VALIDATION AND ACCREDITATION
The term validation is applied to those processes, which seek to determine whether or not a simulation is correct with respect to the "real" system. More prosaically, validation is concerned with the question "Are we building the right system?". Verification, on the other hand, seeks to answer the question "Are we building the system right?"
This track is interested in simulation validation methodologies: methodologies to support the process of constructing a simulation model and then aiding the validation of this model to the "real" system. These system models can be discrete, continuous or hybrid. Application areas range from information systems to engineering and scientific systems. Relevant parameters include performance, properties given by formal or informal requirements, exception handling etc. In this conference track, contributions from all areas of simulation and validation are solicited. Topics include, but are not limited to those given below.
VV&A methodology (effective VV&A, VV&A planning, confidence levels, risk estimation, organisation, documentation, standards, cost estimation, technique application, result presentation, subject matter expert (SME) selection, formal model specification, fidelity, automation potential), VV&A technology (documentation, CASE-tools, cross checking, requirements specification, knowledge based systems, configuration management, tool overview, simulation environments)
VIRTUAL REALITY AND GRAPHICAL SIMULATIONS IN INDUSTRIAL APPLICATIONS
Virtual reality and computer graphics simulations applied to industrial applications.
THE FUTURE OF INDUSTRIAL SIMULATION ROUNDTABLE
Simulation Standards, Future of Simulation Software, What's Virtually Possible, Real-Time Control, Equipment Interface, Supply Chain Opportunities, Customer Focus, Making Simulation relevant
WORKSHOP ON MODELLING AND SIMULATION IN THE TEXTILE INDUSTRY
Textile processes simulation: modelling and simulation in clothing, dyeing and finishing process simulation, production units simulation, textile logistics, spinning mill, spinning simulation, sales forecasting, weavingand knitting simulation...Textile products and materials simulations: textile products simulation and textile chemistry : composite materials, dynamical behaviour of textile structures, fireproofing simulation, flame retardant products, new textiles properties evaluation by simulation, smart and communicating clothes, chemical processes simulation in textiles.
WORKSHOP ON INTELLIGENT TRANSPORT SYSTEMS
A broad range of diverse technologies, known collectively as intelligent transportation systems (ITS), holds the answer to many of our transportation problems. ITS is comprised of a number of technologies, including information processing, communications, control, and electronics. Joining these technologies to our transportation system will save lives, time and money. ITS enables people and goods to move more safely and efficiently through a state-of-the-art, intermodal transportation system. Simulating this aspect of transportation is one of the major challenges of our time.
Simulation in long-term interdisciplinary research, simulation of supramolecular
And macromolecular architectures, simulation in nanobiotechnologies, simulation of nanometric scale engineering techniques for creating materials and components, simulation of manipulator devices, simulation in nano applications
Related to chemicals and energy. Simulation of knowledge based multifunctional
Materials. Simulation of nano production processes and methods.
The keynote for the ISC2005 will be held by Mathieu Mottrie from
Tutorials can be proposed in the following three categories:
T1- Introductory tutorials
T2- State of the Art Tutorials
T3- Software and Modelware Tutorials
Tutorial proposals should be emailed to http://www.velocityreviews.com/forums/(E-Mail Removed)
The poster session only features work in progress. Next to the actual poster
presentation, these submissions also feature as short papers in the Proceedings.
This session is for students who want to present their work in progress or part
of their doctoral thesis as a paper. Student papers are denoted by the fact that
only the name of the student appears on the paper as an author. They are published as short papers in the Proceedings.
For demonstrations or video sessions, please contact Philippe Geril. Special
session will be set up for vendor presentations in co-ordination with the
scientific program. User Group meetings for simulation languages and tools
can be organised during the conference.
If you would like to arrange a meeting, please contact the Conference Chairs. We will be happy to provide a meeting room and other necessary equipment.
Partners for projects session(s) will be organised by EUROSIS to give potential
project teams or individuals the opportunity to present their research in
order to link up with fellow researchers for future research projects. Those
wishing to participate in this session need to send a proposal to Philippe Geril.
A special exhibition will be held during the conference focused on simulation
tools. For more information please contact EUROSIS for further details.
Email: (E-Mail Removed)
DEADLINES AND REQUIREMENTS
Send all submissions in an ELECTRONIC FORM ONLY in uuencoded, zipped Microsoft
Word format, PDF or Postscript format indicating the designated track and
type of submission (full paper or an extended abstract) to EUROSIS
Please provide your name, affiliation, full mailing address, telephone /
fax number and Email address on all submissions as well. For submissions
please put in the subject of your Email the following indications: ISC2005
and designated track or USE THE ABSTRACT SUBMISSION SITE!!
Only original papers, which have not been published elsewhere, will be
accepted for publication
Author EUROSIS Other
Pre-reg before 485 EURO 485 EURO 545 EURO
May. 15th 2005
Registration after Pre-registration 545 EURO 595 EURO
May 15th '2005 required
The registration fee includes one copy of the Conference Proceedings, coffee
and tea during the breaks, all lunches, a welcome cocktail a conference dinner
while cruising the canals in Berlin, a guided visit to a company in the vicinity of Berlin. and a yearlong membership of EUROSIS.
PAPER SUBMISSION TYPES
FULL PAPER (including abstract, conclusions, diagrams, references) Duringreview,the submitted full papers can be accepted as a regular 5 page paper. If excellent,full papers can be accepted by the program committee as an extended (8-page) paper.
Each submission will be reviewed by at least three members of the International
EXTENDED ABSTRACT (at least five pages)
Participants may also submit a 5 page extended abstract for a regular (5 pages)
or short (3 pages) paper or poster, which will be reviewed by the International
Program Committee. All accepted papers will be published in the ISC'2005 Conference Proceedings.
SHORT ABSTRACT (at least three pages)
Participants may also submit a 3 page abstract for a short paper or poster, which will be reviewed by the International Program Committee. All accepted papers will be published in the ISC'2005 Conference Proceedings.
ONE PAGE ABSTRACTS ARE NOT ACCEPTED.
Coupure Links 653
B-9000 Ghent, Belgium
Tel (Office): +32 9 2337790
Fax: + 32 9 2234941
Email: (E-Mail Removed)
OUTSTANDING PAPER AWARD
The 2005 Industrial Simulation Conference Committee will select the Outstanding
Paper of the Conference. The author of this paper will be awarded a free registration for a EUROSIS conference. Only papers SUBMITTED AS FULL papers will be eligible for the Outstanding Paper Award.
The official conference language for all papers and presentations is English.
EARLY SUBMISSION DEADLINE DECEMBER 15TH 2004
SUBMISSION DEADLINE JANUARY 20TH, 2005
January 20, 2005:
Submit contributed full-papers
(5 to 8 proceedings pages) not previously published. These submissions, when
accepted will be published as regular or extended papers, depending on their quality.
Submit extended abstracts (5 abstract pages) or short papers (3 abstract pages), reports of industrial projects and summaries of posters. These submissions, when accepted, will be published as regular, of up to 5 proceedings page papers.
Submit one -to -three page proposals to present tutorials, to organise and chair panel sessions, to organise user meetings, vendor sessions or to exhibit software
January 20, 2005:
Submit abstracts for student and poster session
LATE PAPER SUBMISSION FEBRUARY 15TH, 2005
February 28 - March 5, 2005:
Notification of Acceptance or Rejection
April 30, 2005:
Authors provide camera-ready manuscript
June 9-11, 2005:
VENUE: BERLIN, GERMANY
Berlin is the capital and the biggest city of Germany. It has a population of about 3.5 million and extends over 889 square kilometers. It is located in central Europe, longitude 13:25 E, latitude 52:32 N, 34 m above sea level, at the rivers Spree and Havel. Berlin was the capital of Prussiauntil 1945 and the capital of Germany between 1871 and 1945 and again since the reunification of Germany on October 3, 1990. (The German parliament, called Bundestag, and the German government moved from Bonn to Berlinin 1999.) Between 1949 and 1990, it was divided into East Berlin, the capital of the German Democratic Republic, and West Berlin. It was divided by the Berlin Wall between August 13, 1961, and November 9, 1989.
The ISC'2005 conference is held at the Fraunhofer Institute in Berlin.
http://www.ipk.fhg.de/. The conference is set to coincide with the
http://www.langenachtderwissenschaften.de/ where all participants will
be able to visit on the 11th of June all research centres in Berlin, the whole
Occupation and/or Title:
Zip code: City: Country.
Yes, I intend to attend the ISC'2005:
[ ] Presenting a paper, by submitting a full paper
[ ] Presenting a short paper (by submitting an extended abstract)
[ ] Participating in the industrial program
[ ] Organizing a vendor session
[ ] Proposing a panel discussion (please mention names of panellists)
[ ] Contributing to the exhibition
[ ] Without presenting a paper
The provisional title of my paper / exhibited tool is:
With the following highlights:
The paper belongs to the category (please tick only one):
[ ] Modelling Methodology
[ ] Analysis Methodology
[ ] Discrete Simulation Languages and Tools
[ ] Simulation in Manufacturing
[ ] Simulation in Automotive Systems
[ ] Simulation in Robotics
[ ] Simulation in Electronics, Computers and Telecom
[ ] Simulation in Electronics Manufacturing
[ ] Simulation in Logistics, Traffic, Transport and Harbour Simulation
[ ] Complex Systems Modelling
[ ] Simulation in Aerospace
[ ] Simulation in Industrial and Product Design
[ ] Simulation in Engineering Processes
[ ] Simulation in Energy and Power Systems
[ ] Simulation in Multibody Systems
[ ] Simulation in Chemical and Petroleum Engineering
[ ] Simulation in Military and Defense
[ ] Verification, Validation and Accreditation
[ ] Virtual Reality and Graphical Simulations in Industrial Applications
[ ] The Future of Simulation Roudtable
[ ] Workshop on Modelling and Simulation in the textile Industry
[ ] Workshop on Intelligent Transport Systems
[ ] Workshop NANOSIM
[ ] Workshop on Multimedia, Applications, technologies and Networks
[ ] Tutorials
[ ] Exhibition
[ ] Poster session
[ ] Student Session
Other colleague(s) interested in the topics of the conference is/are:
If you would like to receive more information about EUROSIS and its activities,
please tick the following box:
[ ] YES, I would like to know more about EUROSIS
[ ] NO, please remove me from your database.
Please send or fax this card immediately to: (fax: +188.8.131.52.41)
Philippe Geril, EUROSIS,
Ghent University, Coupure Links 653, B-9000 Ghent, Belgium
|Thread||Thread Starter||Forum||Replies||Last Post|
|CFP: The 2009 International Conference on Modeling, Simulation andVisualization Methods (MSV'09), USA, July 13-16, 2009||A. M. G. Solo||VHDL||0||01-13-2009 02:32 AM|
|berlin.jar ...the first Java conference in Berlin, Germany||Ralph Bergmann||Java||0||07-06-2008 09:34 PM|
|Call for Papers (Extended Deadline): 2007 International Conference on Modeling, Simulation and Visualization Methods (MSV'07), June 25-28, 2007, USA||A. M. G. Solo||VHDL||0||02-21-2007 09:17 AM|
|Last Call for Papers: 2007 International Conference on Modeling, Simulation and Visualization Methods (MSV'07), June 25-28, 2007, USA||A. M. G. Solo||VHDL||0||02-15-2007 01:12 AM|
|CfP: 38th Annual Simulation Symposium..........||Gus||C++||0||06-01-2004 02:39 PM|
Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc..
SEO by vBSEO ©2010, Crawlability, Inc.