Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Programming > VHDL > Archiving Project in QuartusII

Reply
Thread Tools

Archiving Project in QuartusII

 
 
ALuPin
Guest
Posts: n/a
 
      10-06-2004
Hi,

I have the following problem:

When I archive my project on disk H
there are user libraries defined for the project which are
also on H.

When I run the .qar-file everything is ok (I have copied the archived
project to disk E). But how can I manage that the user libraries are
not linked to H anymore?
I mean if I want to safe a running system and make some tests on the
design on H or on the user libraries on H then I would not have the
original design anymore.

That is how can I freeze everything of the original design?

I would appreciate your help.

Rgds
 
Reply With Quote
 
 
 
 
Ken Smith
Guest
Posts: n/a
 
      10-08-2004
In article <(E-Mail Removed) >,
ALuPin <(E-Mail Removed)> wrote:
>Hi,
>
>I have the following problem:
>
>When I archive my project on disk H
>there are user libraries defined for the project which are
>also on H.
>
>When I run the .qar-file everything is ok (I have copied the archived
>project to disk E). But how can I manage that the user libraries are
>not linked to H anymore?
>I mean if I want to safe a running system and make some tests on the
>design on H or on the user libraries on H then I would not have the
>original design anymore.
>
>That is how can I freeze everything of the original design?


You could just make a copy of the whole directory tree so you save every
file involved.

Obviously you have to save the source *.vhd files. You also have to save
the *.qar and the *.acf (I think).

If you copy them back in, you have to "touch" them so that they are newer
than the compiled results. If you don't Quartus may not recompile them.

--
--
http://www.velocityreviews.com/forums/(E-Mail Removed) forging knowledge

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to perform a timing simulation in Modelsim with QuartusII output file ? ALuPin VHDL 13 11-27-2008 05:05 PM
problem about quartusII warning b82422 VHDL 0 07-26-2008 12:05 PM
Internal CPLD Pull Up resistor control (QUARTUSII Software). ferrari VHDL 0 06-29-2008 07:31 AM
General question on the simulation of VHDL-code with Alteras QuartusII Markus Jochim VHDL 4 06-08-2007 04:51 PM
Barrel shifter compilation in QuartusII ALuPin VHDL 0 02-20-2004 01:40 PM



Advertisments