«

To connect a new printer with USB interface to an old PC (Pentium 1 with
Win9 without USB interface, I purchased a PCI card with USB 2.0 ports.
(Sunsway/ST Lab PCI USB 2.0 4+1 port). This should work with Win98. When I
put the card in a free PCI-slot, the PC did not start properly. The screen
turned slightly blue, but no text appeared on the screen.

In the two other slots the screen card and ISDN card are installed.
Any suggestions what might can be wrong?

On Thu, 28 Aug 2003 20:46:49 +0200, In this world we created "Trond"
<s-> wrote :

>To connect a new printer with USB interface to an old PC (Pentium 1 with
>Win9 without USB interface, I purchased a PCI card with USB 2.0 ports.
>(Sunsway/ST Lab PCI USB 2.0 4+1 port). This should work with Win98. When I
>put the card in a free PCI-slot, the PC did not start properly. The screen
>turned slightly blue, but no text appeared on the screen.
>
>In the two other slots the screen card and ISDN card are installed.
>Any suggestions what might can be wrong?
>

I suspect your card requires Win98SE :/



--
Free Windows/PC help,
http://www.geocities.com/sheppola/trouble.html
Free songs download,
http://artists.mp3s.com/artists/17/sheppard.html