Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Cisco 7206 Router

Reply
Thread Tools

Cisco 7206 Router

 
 
jim
Guest
Posts: n/a
 
      04-22-2006
Hello,

I am trying to find the commands that would allow a static IP address
from the router's WAN port to the router's LAN port (internal lan i.e.
192.168.....) and
vice versa.

I am able to get the static IP address setup and ping the WWW, but NOT the
internal side of the router.

I am somewhat familiar with the normal commands.

The router is a 7206 with 0/1 0/2 and 0/3 GIG ports.

Any assistance is very much appreciated.

-J


 
Reply With Quote
 
 
 
 
info@blueconsole.com
Guest
Posts: n/a
 
      04-23-2006
Static routes generally point to a next-hop rather than an interface.
If your internal clients are on the same subnet as the 7206, no route
is needed. If this is an Internet application, note that you may need
to employ NAT for your 192.168 network, as that network will not be
reachable from Internet users.

Steve Griffin
www.blueconsole.com (Bluetooth Wireless Console Cable)

jim wrote:
> Hello,
>
> I am trying to find the commands that would allow a static IP address
> from the router's WAN port to the router's LAN port (internal lan i.e.
> 192.168.....) and
> vice versa.
>
> I am able to get the static IP address setup and ping the WWW, but NOT the
> internal side of the router.
>
> I am somewhat familiar with the normal commands.
>
> The router is a 7206 with 0/1 0/2 and 0/3 GIG ports.
>
> Any assistance is very much appreciated.
>
> -J


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
7206-dslam-adsl-7206 FLEngineer Cisco 0 05-08-2008 12:46 PM
Router 7206 low throughput eduke Cisco 8 07-24-2005 02:48 PM
Help - lost access to 7206 router R Siffredi Cisco 3 04-11-2005 01:42 PM
bridging over a t1 between cisco 2611 and cisco 7206 Chad Whitten Cisco 0 02-17-2004 04:20 PM
Cisco 7206 random reboots Rick G Cisco 1 07-16-2003 11:52 PM



Advertisments