Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > pix 506 E config

Reply
Thread Tools

pix 506 E config

 
 
deep
Guest
Posts: n/a
 
      04-22-2006
Hi,


i have to config the Pix Firewall for just internet access
now i am running my internet directly to public ip's but now with PIX
506E.

Plz gime me wht config i have to do in my pix as well as wht change i
will have to do in my Router that is connected to internet through E1
line.


My current config of PIx is as


PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname PIX12tL
domain-name shyam.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 59.144.164.33 255.255.255.0
ip address inside 172.16.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 0.0.0.0 0.0.0.0 0 0
static (inside,outside) 59.144.164.40 172.16.2.2 netmask
255.255.255.255 0 0



timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 202.78.168.118 255.255.255.255 outside
http 172.16.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet 172.16.1.0 255.255.255.0 inside
telnet timeout 5
ssh 202.78.168.118 255.255.255.255 outside
route outside 0.0.0.0 0.0.0.0 59.144.164.1 1
route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
route inside 172.16.4.0 255.255.255.224 172.16.1.5 1

ssh timeout 5
console timeout 0
username shyam password ZyD6kufF3mkoCa8R encrypted privilege 2
terminal width 80
Cryptochecksum:15a136f7cd824c5631dcb1438936b338
: end

 
Reply With Quote
 
 
 
 
Walter Roberson
Guest
Posts: n/a
 
      04-22-2006
In article <(E-Mail Removed) .com>,
deep <(E-Mail Removed)> wrote:
>i have to config the Pix Firewall for just internet access
>now i am running my internet directly to public ip's but now with PIX
>506E.


>Plz gime me wht config i have to do in my pix as well as wht change i
>will have to do in my Router that is connected to internet through E1
>line.


I'm sorry, could you restate the problem? What is the difference
between what you have now and the state you want?


>My current config of PIx is as


>PIX Version 6.3(4)


>ip address outside 59.144.164.33 255.255.255.0
>ip address inside 172.16.1.1 255.255.255.0


>global (outside) 1 interface
>nat (inside) 0 0.0.0.0 0.0.0.0 0 0
>static (inside,outside) 59.144.164.40 172.16.2.2 netmask 255.255.255.255 0 0


>route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
>route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
>route inside 172.16.4.0 255.255.255.224 172.16.1.5 1


Currently, you have internal networks
172.16.1.0-255,
172.16.2.0-31,
172.16.3.0-31,
172.16.4.0-31
and you have an internal router at 172.16.1.5 .

Currently all of your traffic goes out through the public IP 59.144.164.33
except for 172.16.2.2, which goes out as 59.144.164.40 .

You do not allow any incoming connections from outside to inside.

What is the new configuration that you would like?
 
Reply With Quote
 
 
 
 
NETADMIN
Guest
Posts: n/a
 
      04-22-2006
HI deep,
Canyou post some clear ind\formationof the situation.
And in your config followinag parts are wringplease correct this:

>>global (outside) 1 interface
>>nat (inside) 0 0.0.0.0 0.0.0.0 0 0


It should be :
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0

If you cangive me diagrammay be i can help


Rgrds....
CK-NET

 
Reply With Quote
 
Hemat Maheshwari
Guest
Posts: n/a
 
      04-22-2006
Its not much clear from the given info ... but shud be as

ip address outside "public Ip"

ip address inside "ip of inside netwrok"

route outside 0.0.0.0 0.0.0.0 "Public IP" 1

route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
route inside 172.16.4.0 255.255.255.224 172.16.1.5 1

global (outside) 1 interface

 
Reply With Quote
 
Walter Roberson
Guest
Posts: n/a
 
      04-23-2006
In article <(E-Mail Removed). com>,
Hemat Maheshwari <(E-Mail Removed)> wrote:
>Its not much clear from the given info ... but shud be as


>ip address outside "public Ip"


>ip address inside "ip of inside netwrok"


>route outside 0.0.0.0 0.0.0.0 "Public IP" 1


Better is

route outside 0.0.0.0 0.0.0.0 "Router IP" 1

>route inside 172.16.2.0 255.255.255.224 172.16.1.5 1
>route inside 172.16.3.0 255.255.255.224 172.16.1.5 1
>route inside 172.16.4.0 255.255.255.224 172.16.1.5 1


>global (outside) 1 interface


nat (inside) 1 0.0.0.0 0.0.0.0
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pix 501 to pix 506 easy vpn fredrikmagnil@hotmail.com Cisco 3 05-22-2006 06:42 AM
pix 506 E config deep Cisco 0 04-22-2006 07:22 AM
pix 506 E config deep Cisco 0 04-22-2006 07:22 AM
Terminal Server config for PIX 506 Brian Cisco 4 04-06-2006 01:27 PM
VPN Site-to-Site with PIX 506 and PIX 515UR (6.3.1). How ? Javier Villegas Cisco 1 01-27-2004 07:29 PM



Advertisments