Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > FAX onramp (FAX to Mail Gateway)

Reply
Thread Tools

FAX onramp (FAX to Mail Gateway)

 
 
news.tic.ch
Guest
Posts: n/a
 
      04-19-2006
Hi, I'm trying to configure a fax to mail service at my lab

I have seen at cisco as it is possible to transfer faxes over slow lines per
smtp and as it is allso usable as fax gateway.

Now I have tried to configure this, as shown at config exaples of Cisco
but with out any success.
When ever I call to the FXO port 1/0/0 I got the fast busy signal
When ever I call to the FXO port 1/0/1 I can dial 100 or 101 fine

It wold be grate if sommbody hs a idee what is todo or where I can search to
the misstake?

How is it connected:
voice-port 1/0/0 - fxo - POTS public Number
voice-port 1/0/1 - fxo - POTS public Number to cheq redirection to the
phones
voice-port 1/1/0 - fxs - Phone 100
voice-port 1/1/1 - fxs - Phone 101

Hardware:
IOS (tm) 3600 Software (C3640-JSX-M), Version 12.3(3a), RELEASE (fc2)
System image file is "slot0:c3640-jsx-mz.123-3a.bin"
cisco 3640 (R4700) processor (revision 0x00) with 94208K/4096K bytes
1 Ethernet/IEEE 802.3 interface(s)
2 Voice FXO interface(s)
2 Voice FXS interface(s)

Code snip
Cisco 3640#
!
hostname fax2mail
!
ip domain name xxxxxx.ch
ip name-server 217.xx.xx.xx
ip name-server 217.xx.xx.xx
!
ip cef
!
voice call carrier capacity active
!
fax receive called-subscriber $d$
fax interface-type fax-mail
mta send server 217.xx.xx.xx port 25
mta send subject Fax2Mail from fax.xxxxxx.ch
mta send with-subject both
mta send filename both
mta send filename both
mta send mail-from hostname xxxxxx.ch
mta send mail-from username fax2mail
dial-control-mib retain-timer 1440
dial-control-mib max-size 500
!
call application voice onramp slot0:app_faxmail_onramp.2.0.1.3.tcl
!
! FXO
voice-port 1/0/0
! FXO
voice-port 1/0/1
! FXS
voice-port 1/1/0
! FXS
voice-port 1/1/1
!
dial-peer voice 99 pots
application onramp
incoming called-number .
port 1/0/0
!
dial-peer voice 1 mmoip
application fax_on_vfc_onramp_app out-bound
destination-pattern 99
information-type fax
session target (E-Mail Removed)
!
dial-peer voice 100 pots
destination-pattern 100
port 1/1/0
!
dial-peer voice 101 pots
destination-pattern 101
port 1/1/1
!
dial-peer voice 201 pots
destination-pattern 0.
port 1/0/1
!
gateway
!
gatekeeper
shutdown
!



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Free internet fax service, Fax online, Fax, Email fax freefreehouse@yahoo.com Computer Information 0 01-02-2008 09:21 AM
free fax service, Fax online, Fax, Email fax george Computer Information 0 12-26-2007 03:35 PM
Antw: t.37 onramp on directly attached to the routers fxs-port Horst Wagner Cisco 0 02-10-2006 05:48 PM
fax onramp problem Charles de Lorena Cisco 0 02-02-2005 10:17 AM
Version of app-faxmail-onramp for 12.2 T? Guan Yang Cisco 0 02-25-2004 03:37 PM



Advertisments