Hi.
Seeing signal in the Wireless configuration application, or reading
somewhere in the system that you are connected, does not mean that you
actually have a functional Wireless connection.
If you can use the Internet with your Wireless Computer, the Wireless
connection is OK. If you do not have an Internet connection available (or
the connection does not work) a simple way to ascertain that you have a
basic Wireless connection is to try to use the Internet Browser in a
Wireless Client computer and find out if you can connect to the Router's
(Access Point) Menus (see your hardware manual for the Router's IP Address,
the login name and the password).
If you cannot connect to the Router this might help.
Wireless Basic Configuration -
http://www.ezlan.net/Wireless_Config.html
Wireless Security -
http://www.ezlan.net/Wireless_Security.html
Once the Wireless is actually connected, you need to configure each computer
Sharing settings. May be this can help
http://www.ezlan.net/sharing.html
Jack (MVP-Networking).
"Peter F" <> wrote in message
news:EBF8BF1B-DA9A-46B7-BFAB-...
> Hi All,
>
> I have just installed a linksys wireless router and am having trouble with
> an upstiars connection. Every time i attemp to access the internet i get a
> page connot be displayed check DNS settings on the web page. when i click
> on
> the wireless router software it comes up with - and i quote " you are
> connected to the Access point, but the internet cannot be found" obviously
> this is the reason i cannot get an internet browser page.
>
> I have attempted to trouble shoot the problem by checking settings on my
> firewall. I have Zone Alarm Pro i think they are all ok. i also have Zone
> Alarm Pro on my computer upstairs and that also seems ok. Please could
> someone help me as i do not know where to turn.
>
> Kind regards
> --
> Peter