cisco ASA5505 sla monitoring
I'm not sure how does the SLA monitoring works...
sla monitor 123 type echo protocol ipIcmpEcho 10.0.0.1 interface outside num-packets 3 frequency 10
!--- Configure a new monitoring process with the ID 123. Specify the
!--- monitoring protocol and the target network object whose availability the tracking
!--- process monitors. Specify the number of packets to be sent with each poll.
!--- Specify the rate at which the monitor process repeats (in seconds).
When does the routing table change the default route?
If the 3 send packets will get 3x timeout response or it's enought that just one of those 3 packets dont respond?
I would like to set up that the routing table (default route) will rebuild after 30 second of timeout the primary default gateway.
how can I setup that the backup connection will start but after 30s of icmp timeout the default gateway (tracket object - 192.168.1.1)
sla monitor 123
type echo protocol ipIcmpEcho 192.168.1.1 interface outside
sla monitor schedule 123 life forever start-time now
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 track 1
route backup 0.0.0.0 0.0.0.0 192.168.2.1 254
track 1 rtr 123 reachability
|All times are GMT. The time now is 11:40 AM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.