Loading Win XP
 

Hi

I have a 6 year old Sony Vaio VGN-517m laptop that has no optical drive,
nor a hard drive.
I have a new hard drive (100 Gb) to fit, and a Win XP cd, how do I
install the Win XP OS, please?

The old Sony cannot boot from USB.

I have access to a 64-bit Win 7 home premium laptop (that can also boot
into Ubuntu, but then sometimes the trackpad will not work and the
screen will not dim in Ubuntu.), and a 32-bit Win 7 home premium laptop.

Should I remove the hard drive from the 32-bit laptop and install the
new hard drive in that, then use the optical drive in that laptop ?

How many partitions should I format the new hard drive to ?


Thanks for your time

best wishes

David

Re: Loading Win XP
 

David wrote:
> Hi
>
> I have a 6 year old Sony Vaio VGN-517m laptop that has no optical drive,
> nor a hard drive.
> I have a new hard drive (100 Gb) to fit, and a Win XP cd, how do I
> install the Win XP OS, please?
>
> The old Sony cannot boot from USB.
>
> I have access to a 64-bit Win 7 home premium laptop (that can also boot
> into Ubuntu, but then sometimes the trackpad will not work and the
> screen will not dim in Ubuntu.), and a 32-bit Win 7 home premium laptop.
>
> Should I remove the hard drive from the 32-bit laptop and install the
> new hard drive in that, then use the optical drive in that laptop ?
>
> How many partitions should I format the new hard drive to ?
>
>
> Thanks for your time
>
> best wishes
>
> David
>

You could do it the way I did it.

I did this purely for fun, when I built my current WinXP computer.

I prepared the hard drive separately. I put two FAT32 partitions on
the disk. The first one relatively large (say, 30GB). The second
one small (at around 1GB). You store the contents of the CD into the
small second partition.

In the i386 folder of the install CD, are around 5000 files or so.
Two files of interest, are WINNT32.EXE and WINNT.EXE . One of those
runs in Windows, the other runs in DOS. If you select the wrong one,
it'll probably tell you the program won't run in your current environment.

So the idea is, you need a boot environment, that will allow you
to run the WINNT or WINNT32 installer program.

What I used, was an MSDOS boot floppy. My floppy was prepared
in Win98, so the version of MSDOS is new enough, that it
understands FAT32. When the DOS prompt appeared after
boot, I could enter "D:" at the command prompt, to
change directories to the D: partition. Then "cd i386"
gets me pointed at the i386 directory. Then, I typed
in the name of the installer program, like "winnt.exe"
and away it went.

The first stage of the install, copies files from D: to C:.
And since it's DOS, and the DOS I was using understands FAT32
but not NTFS, I could not use NTFS at that time. If I wanted
C: to be NTFS, I could do that later using the "convert"
command.

On the first reboot, I think you'll actually be booting from
C:, so at that point, you'll want to verify that C: is booting.
(Hmmm. That could be tricky if your initial boot OS is also
on the hard drive.)

So now the question boils down to, what practical way is there,
to get an MSDOS boot media and boot it. Do you have a floppy
drive ? The machine won't boot from USB, so that's out.
You could I suppose, install a third partition on the
hard drive (as part of the pre-install setup), but
can you do that with DOS ? I've never installed DOS
on a machine - I've only used the boot floppy (which
is not a complete DOS installation by any stretch
of the imagination).

I optimized my boot floppy a little bit, by installing
something which enhances file reading, but it took so
long to set it up, it's better to just wait the half hour
it might take to copy files from D: to C: instead. But since
my experiments were more for fun (I wanted to try it because
I'd just heard about the install technique), I spent the time
anyway, to see how much faster the install would be, going
from hard drive partition to hard drive partition. While
it speeded up the install a little bit, I wouldn't say it
was "jaw dropping fast". DOS is a pretty crappy environment,
and I'm just happy it got the job done.

So that's a basic idea of how you can do it.

As for the drive letters of the partitions, you have to be
careful when placing the partitions on the disk. I defined
C: as the first partition (30GB), D: as the second partition
(big enough to hold the contents of a 700MB install CD).
If you were going to put DOS on the disk, it would be nice
to make it the third partition. What I can't tell you ogg
hand, is whether DOS would need to be within 8GB of sector 0
to boot or not.

So there are still a few unknowns.

If you had a CD drive or a floppy, then you'd be able to get
an MSDOS image off the web and boot from that. I'm just not sure
of the details of how you'd get MSDOS on its own partition,
and use that to boot the machine.

Another option would be to net boot the laptop using PXE.
Some BIOS mention a PXE option, which is a code module
in the BIOS that will use the network interface, to
get boot code from another computer. Again, I've never
had to set one of those up, so can't give any details.
Years ago, there was a protocol called "bootp" that was
used for booting XWindow terminals, and you didn't
need a disk in the machine, because the machine could
instead send packets to a server to get the boot data.

Anyway, the key point here is, you can copy the CDROM files
onto the hard drive, and the installer programs WINNT32 or
WINNT can be used to start an install. And the remaining
problem to be solved, is how you can get enough of a
Windows pre-install environment, so you can execute the
installer. I used an MSDOS floppy, but there was also a
six floppy set from the Microsoft site, that could be
used to boot a computer. But this info is only of
interest, if the laptop had a floppy interface.

Have fun (I did :-) )

Paul

Re: Loading Win XP
 

"David" <me@home.org> wrote in message
news:jd0fa0$ls9$1@speranza.aioe.org...
> Hi
>
> I have a 6 year old Sony Vaio VGN-517m laptop that has no optical drive,
> nor a hard drive.
> I have a new hard drive (100 Gb) to fit, and a Win XP cd, how do I install
> the Win XP OS, please?
>
> The old Sony cannot boot from USB.
>
> I have access to a 64-bit Win 7 home premium laptop (that can also boot
> into Ubuntu, but then sometimes the trackpad will not work and the screen
> will not dim in Ubuntu.), and a 32-bit Win 7 home premium laptop.
>
> Should I remove the hard drive from the 32-bit laptop and install the new
> hard drive in that, then use the optical drive in that laptop ?
>
> How many partitions should I format the new hard drive to ?
>
>
> Thanks for your time
>
> best wishes
>
> David
>


The HDD took a dump, so you need a new one. No trouble.

What happened to the optical drive?

Sony _knows_ that you will need to boot from something, and if there is no
built-in optical drive, then it has to be capable of booting from an
external CD, which is by definition going to be a USB-based device. If you
cannot boot from a USB-based drive, then you have to go into the BIOS --
typically you press ESC or DEL during boot to get the Set-up screen -- and
make the Boot Priority to be the USB first, and the HDD second. Frankly, you
almost never want the HDD to be the primary boot device for precisely this
reason. If the HDD goes away, then you need to be able to boot from
something else. If the CD has a bootable media loaded -- and how often does
this happen in the real world? -- then you merely eject it and reboot to the
OS. No big deal...

If you do not have an external CD, then you will need one. They don't cost
much. You can get them at Fry's online for really cheap, and from BestBuy
for a little more and take it home today. If you have a Fry's near by, then
go for a drive -- drive a little and save a lot. (You can print the Fry's ad
and BestBuy will match it.)

I see no point in making a partition in a 100G drive. Format it all at once
and move on.

Re: Loading Win XP
 

On 23/12/2011 01:00, Paul wrote:
> David wrote:
>> Hi
>>
>> I have a 6 year old Sony Vaio VGN-517m laptop that has no optical
>> drive, nor a hard drive.
>> I have a new hard drive (100 Gb) to fit, and a Win XP cd, how do I
>> install the Win XP OS, please?
>>
>> The old Sony cannot boot from USB.
>>
>> I have access to a 64-bit Win 7 home premium laptop (that can also
>> boot into Ubuntu, but then sometimes the trackpad will not work and
>> the screen will not dim in Ubuntu.), and a 32-bit Win 7 home premium
>> laptop.
>>
>> Should I remove the hard drive from the 32-bit laptop and install the
>> new hard drive in that, then use the optical drive in that laptop ?
>>
>> How many partitions should I format the new hard drive to ?
>>
>>
>> Thanks for your time
>>
>> best wishes
>>
>> David
>>
>
> You could do it the way I did it.
>
> I did this purely for fun, when I built my current WinXP computer.
>
> I prepared the hard drive separately. I put two FAT32 partitions on
> the disk. The first one relatively large (say, 30GB). The second
> one small (at around 1GB). You store the contents of the CD into the
> small second partition.
>
> In the i386 folder of the install CD, are around 5000 files or so.
> Two files of interest, are WINNT32.EXE and WINNT.EXE . One of those
> runs in Windows, the other runs in DOS. If you select the wrong one,
> it'll probably tell you the program won't run in your current environment.
>
> So the idea is, you need a boot environment, that will allow you
> to run the WINNT or WINNT32 installer program.
>
> What I used, was an MSDOS boot floppy. My floppy was prepared
> in Win98, so the version of MSDOS is new enough, that it
> understands FAT32. When the DOS prompt appeared after
> boot, I could enter "D:" at the command prompt, to
> change directories to the D: partition. Then "cd i386"
> gets me pointed at the i386 directory. Then, I typed
> in the name of the installer program, like "winnt.exe"
> and away it went.
>
> The first stage of the install, copies files from D: to C:.
> And since it's DOS, and the DOS I was using understands FAT32
> but not NTFS, I could not use NTFS at that time. If I wanted
> C: to be NTFS, I could do that later using the "convert"
> command.
>
> On the first reboot, I think you'll actually be booting from
> C:, so at that point, you'll want to verify that C: is booting.
> (Hmmm. That could be tricky if your initial boot OS is also
> on the hard drive.)
>
> So now the question boils down to, what practical way is there,
> to get an MSDOS boot media and boot it. Do you have a floppy
> drive ? The machine won't boot from USB, so that's out.
> You could I suppose, install a third partition on the
> hard drive (as part of the pre-install setup), but
> can you do that with DOS ? I've never installed DOS
> on a machine - I've only used the boot floppy (which
> is not a complete DOS installation by any stretch
> of the imagination).
>
> I optimized my boot floppy a little bit, by installing
> something which enhances file reading, but it took so
> long to set it up, it's better to just wait the half hour
> it might take to copy files from D: to C: instead. But since
> my experiments were more for fun (I wanted to try it because
> I'd just heard about the install technique), I spent the time
> anyway, to see how much faster the install would be, going
> from hard drive partition to hard drive partition. While
> it speeded up the install a little bit, I wouldn't say it
> was "jaw dropping fast". DOS is a pretty crappy environment,
> and I'm just happy it got the job done.
>
> So that's a basic idea of how you can do it.
>
> As for the drive letters of the partitions, you have to be
> careful when placing the partitions on the disk. I defined
> C: as the first partition (30GB), D: as the second partition
> (big enough to hold the contents of a 700MB install CD).
> If you were going to put DOS on the disk, it would be nice
> to make it the third partition. What I can't tell you ogg
> hand, is whether DOS would need to be within 8GB of sector 0
> to boot or not.
>
> So there are still a few unknowns.
>
> If you had a CD drive or a floppy, then you'd be able to get
> an MSDOS image off the web and boot from that. I'm just not sure
> of the details of how you'd get MSDOS on its own partition,
> and use that to boot the machine.
>
> Another option would be to net boot the laptop using PXE.
> Some BIOS mention a PXE option, which is a code module
> in the BIOS that will use the network interface, to
> get boot code from another computer. Again, I've never
> had to set one of those up, so can't give any details.
> Years ago, there was a protocol called "bootp" that was
> used for booting XWindow terminals, and you didn't
> need a disk in the machine, because the machine could
> instead send packets to a server to get the boot data.
>
> Anyway, the key point here is, you can copy the CDROM files
> onto the hard drive, and the installer programs WINNT32 or
> WINNT can be used to start an install. And the remaining
> problem to be solved, is how you can get enough of a
> Windows pre-install environment, so you can execute the
> installer. I used an MSDOS floppy, but there was also a
> six floppy set from the Microsoft site, that could be
> used to boot a computer. But this info is only of
> interest, if the laptop had a floppy interface.
>
> Have fun (I did :-) )
>
> Paul


Hi Paul,

Thank you very much for your reply, and the time and trouble to give the
info.

The laptop does not have a floppy, but I do have a copy of Hirens boot
disc that can boot into "mini XP", but I would need to burn an ISO of
that to the new hard drive somewhere ?

Thanks again , and seasons greetings


David

Re: Loading Win XP
 

On 23/12/2011 01:06, Jeff Strickland wrote:
>
> "David" <me@home.org> wrote in message
> news:jd0fa0$ls9$1@speranza.aioe.org...
>> Hi
>>
>> I have a 6 year old Sony Vaio VGN-517m laptop that has no optical
>> drive, nor a hard drive.
>> I have a new hard drive (100 Gb) to fit, and a Win XP cd, how do I
>> install the Win XP OS, please?
>>
>> The old Sony cannot boot from USB.
>>
>> I have access to a 64-bit Win 7 home premium laptop (that can also
>> boot into Ubuntu, but then sometimes the trackpad will not work and
>> the screen will not dim in Ubuntu.), and a 32-bit Win 7 home premium
>> laptop.
>>
>> Should I remove the hard drive from the 32-bit laptop and install the
>> new hard drive in that, then use the optical drive in that laptop ?
>>
>> How many partitions should I format the new hard drive to ?
>>
>>
>> Thanks for your time
>>
>> best wishes
>>
>> David
>>
>
>
> The HDD took a dump, so you need a new one. No trouble.
>
> What happened to the optical drive?
>
> Sony _knows_ that you will need to boot from something, and if there is
> no built-in optical drive, then it has to be capable of booting from an
> external CD, which is by definition going to be a USB-based device. If
> you cannot boot from a USB-based drive, then you have to go into the
> BIOS -- typically you press ESC or DEL during boot to get the Set-up
> screen -- and make the Boot Priority to be the USB first, and the HDD
> second. Frankly, you almost never want the HDD to be the primary boot
> device for precisely this reason. If the HDD goes away, then you need to
> be able to boot from something else. If the CD has a bootable media
> loaded -- and how often does this happen in the real world? -- then you
> merely eject it and reboot to the OS. No big deal...
>
> If you do not have an external CD, then you will need one. They don't
> cost much. You can get them at Fry's online for really cheap, and from
> BestBuy for a little more and take it home today. If you have a Fry's
> near by, then go for a drive -- drive a little and save a lot. (You can
> print the Fry's ad and BestBuy will match it.)
>
> I see no point in making a partition in a 100G drive. Format it all at
> once and move on.
>
>

Hi Jeff,

Thank you for your reply.

The optical drive went tits up, and a known working optical drive would
not work after it was installed, leaving me to suspect the motherboard
is at fault. Not that that matters, as the laptop worked fine without
the optical drive.
The hard drive failed in use and no data could be saved from it. Every
time it booted over the last few months of use, more clusters went bad
and it eventually it failed. Even using manufacturer disc repair
programs with the hard drive in a USB caddy could not recover data.

The old Sony cannot boot into USB, the BIOS does not give that option.

thanks and seasons greetings

David

Re: Loading Win XP
 

David wrote:

>
>
> Hi Paul,
>
> Thank you very much for your reply, and the time and trouble to give the
> info.
>
> The laptop does not have a floppy, but I do have a copy of Hirens boot
> disc that can boot into "mini XP", but I would need to burn an ISO of
> that to the new hard drive somewhere ?
>
> Thanks again , and seasons greetings
>
>
> David

Well, you understand the requirements now. Something has to go on the
end of the disk, to function as the "Install OS" while the installer
is running. Normally, that would come from the WinXP installer CD and
its boot environment (CD based). In this example, I show "FreeDOS" as
a solution, but I have no first hand experience with FreeDOS.

+----------------------------+----------------------------+---------------+
|C: for WinXP (min 1.5GB) |D: for CD content (>700MB) |FreeDOS FAT16? |
|Format FAT32 for DOS access |Format FAT32 for DOS access |Install OS |
+----------------------------+----------------------------+---------------+

This looks very scary, so ignore for now. Don't get bogged down in
the details quite yet.

http://sourceforge.net/apps/mediawik...?title=Install

Have a look at the download site.

http://www.freedos.org/freedos/files/

There is a fdbasecd.iso . I expect that's how you
transfer freedos to a hard drive, but I'm not sure.

Your steps would be something like:

1) Use a separate PC. Disconnect the regular hard drives for safety.
Connect the laptop drive. Leave the optical drive connected. Total
of two devices connected. This will prevent the FreeDOS CD from damaging
anything else.

2) Boot a Linux LiveCD, and prepare the three partitions shown. You
could try GParted as a LiveCD, which is smaller and pretty limited.
I don't know if it would do a good job for this project.

3) Copy at least the WinXP installer CD into D:, including at minimum,
the i386 folder and the 5000 files. If you're using a Linux LiveCD,
it's possible to transfer the entire CD into RAM (TORAM=yes for Ubuntu),
and then the CD drive can be emptied so you can fit other CDs into it.

4) Boot the fdbasecd.iso, install FreeDOS into the last partition.

5) Verify the disk boots to FreeDOS prompt in the "build" computer.

6) Move the hard drive back to the laptop, and attempt to boot FreeDOS
there.

7) Use "D:", "cd i386", then run the ntsetup command (which ever one
of the two will work), and start the install to C:. If the FreeDOS
drive lettering is screwed up, it'll only take a few checks like
"E:" and "dir" to figure out which partition contains the WinXP CD
contents.

8) The first stage of install, will destroy the ability to boot FreeDOS
again. On the next reboot (half way through the install), you'll be
booting the prototype C: and the install will finish. If something
fouls up at this point, and you want to start over again, you'll
have to reinstall FreeDOS (to fix the MBR).

Note: I don't know if FreeDOS has any restrictions on how far out
on the disk it can be, and still boot. Years ago, there were CHS geometry
based restrictions, that prevented booting above 8GB (or some lesser
number).

The reason I've picked a particular order for the partitions, is
so when the WinXP install commences, you actually end up with
C: being the Windows partition. If you use some other partition
order, then the WinXP drive letter could end up D: or E:. I got that
wrong when I did it, and my first attempt ended up with WinXP
being on letter D:. So I had to do it over again.

So that is an example of the approach I'd attempt, but I have
no idea how hard this is going to be to set up.

*******

You never know, there might be some other technique for properly staging
files into C:, effectively doing the first copy stage instead of
letting the WinXP CD do it. Have a look around. The tricky part,
is the WinXP installer writes the MBR and sets the boot flag, so
the next time it boots, it's ready to go.

When I did my "bit of fun", it took an entire day of work
to complete the project. So don't expect this effort to be
a ten minute job. You'll need some tools and a good CD
collection (Linux LiveCDs or whatever), to prep things.

To get a Linux LiveCD to run from RAM, you need a machine with
around 1.5GB minimum RAM. That leaves 700MB of RAM to store the
CD, plus some RAM for the runtime environment. I boot LiveCDs into
RAM, if I expect to be running the OS for more than a few hours
that way. It saves wear and tear on the CD drive. On Ubuntu,
the kernel boot line has the "quiet" thing on the end of the
line removed, and then you can put TORAM=yes there. It takes
about three minutes to boot that way, while the entire 700MB
CD is transferred to RAM. The only LiveCD where that isn't
practical, is my Knoppix DVD which is over 3GB in size. That
would take too much RAM to store entirely. But the other LiveCDs are
small enough to do that. I even use that technique, when scanning
my computer with a Kaspersky scanning CD, boot to RAM so I can
pop out the CD, and the scan can proceed quietly without the
noise of CD grindage.

If your "build" machine has two optical drives, you don't need
any "TORAM" stuff. You can boot the LiveCD in one optical drive,
install the WinXP CD in the second optical drive, and copy the
files over into the target (laptop) hard drive.

HTH,
Paul

Re: Loading Win XP
 

"David" <me@home.org> wrote in message
news:jd1rd0$c65$1@speranza.aioe.org...
> On 23/12/2011 01:06, Jeff Strickland wrote:
>>
>> "David" <me@home.org> wrote in message
>> news:jd0fa0$ls9$1@speranza.aioe.org...
>>> Hi
>>>
>>> I have a 6 year old Sony Vaio VGN-517m laptop that has no optical
>>> drive, nor a hard drive.
>>> I have a new hard drive (100 Gb) to fit, and a Win XP cd, how do I
>>> install the Win XP OS, please?
>>>
>>> The old Sony cannot boot from USB.
>>>
>>> I have access to a 64-bit Win 7 home premium laptop (that can also
>>> boot into Ubuntu, but then sometimes the trackpad will not work and
>>> the screen will not dim in Ubuntu.), and a 32-bit Win 7 home premium
>>> laptop.
>>>
>>> Should I remove the hard drive from the 32-bit laptop and install the
>>> new hard drive in that, then use the optical drive in that laptop ?
>>>
>>> How many partitions should I format the new hard drive to ?
>>>
>>>
>>> Thanks for your time
>>>
>>> best wishes
>>>
>>> David
>>>
>>
>>
>> The HDD took a dump, so you need a new one. No trouble.
>>
>> What happened to the optical drive?
>>
>> Sony _knows_ that you will need to boot from something, and if there is
>> no built-in optical drive, then it has to be capable of booting from an
>> external CD, which is by definition going to be a USB-based device. If
>> you cannot boot from a USB-based drive, then you have to go into the
>> BIOS -- typically you press ESC or DEL during boot to get the Set-up
>> screen -- and make the Boot Priority to be the USB first, and the HDD
>> second. Frankly, you almost never want the HDD to be the primary boot
>> device for precisely this reason. If the HDD goes away, then you need to
>> be able to boot from something else. If the CD has a bootable media
>> loaded -- and how often does this happen in the real world? -- then you
>> merely eject it and reboot to the OS. No big deal...
>>
>> If you do not have an external CD, then you will need one. They don't
>> cost much. You can get them at Fry's online for really cheap, and from
>> BestBuy for a little more and take it home today. If you have a Fry's
>> near by, then go for a drive -- drive a little and save a lot. (You can
>> print the Fry's ad and BestBuy will match it.)
>>
>> I see no point in making a partition in a 100G drive. Format it all at
>> once and move on.
>>
>>
>
> Hi Jeff,
>
> Thank you for your reply.
>
> The optical drive went tits up, and a known working optical drive would
> not work after it was installed, leaving me to suspect the motherboard is
> at fault. Not that that matters, as the laptop worked fine without the
> optical drive.
> The hard drive failed in use and no data could be saved from it. Every
> time it booted over the last few months of use, more clusters went bad and
> it eventually it failed. Even using manufacturer disc repair programs with
> the hard drive in a USB caddy could not recover data.
>
> The old Sony cannot boot into USB, the BIOS does not give that option.
>
> thanks and seasons greetings
>
> David

Sounds like you need to shop at www.frys.com for a new machine. Or, visit
your local Costco -- which I think is actually the better option.

If your laptop is so old as to not support USB boot devices, _and_ has a
dead optical drive controller and a beat up HDD, it sounds as if you can get
a far better machine that is new for not much more than you are about to
pour into the old machine that still won't work very well after you get it
going again.

I completely agree with your trepidation to move to Win7, I too resist the
call to migrate that way. I run XP Pro, and my wife has a Vista box that I
don't even like to be in the same room with. My issue isn't even that Vista
sucks from an operating standpoint, it sucks for me because the familiarity
with the GUI is so changed that I cannot find my way around. Win7 is
supposed to be more stable and therefore a better operating system, but the
familiarity issues remain. Even with WinXP, I have the GUI set to Windows
Classic...

Re: Loading Win XP
 

David wrote:

>
> Hi Paul,
>
> Thank you very much for your reply, and the time and trouble to give the
> info.
>
> The laptop does not have a floppy, but I do have a copy of Hirens boot
> disc that can boot into "mini XP", but I would need to burn an ISO of
> that to the new hard drive somewhere ?
>
> Thanks again , and seasons greetings
>
>
> David

I did some testing of FreeDOS in a virtual machine. I use VPC2007
within a WinXP environment, for testing things.

I was able to install FreeDOS, using the FreeDOS base installer.
(In a virtual machine, you create a virtual 16GB hard drive, and
that's what the virtual machine is installing to, not a physical
disk as such.)

This is my final partition configuration.

http://img72.imageshack.us/img72/1738/xfdisk.gif

The problem with the FreeDOS package, is it's insistence on
creating hidden partitions, for the "non C:" partitions.

When using the FreeDOS installer CD, there is a program called
"xfdisk" which controls disk formatting and partitioning type
stuff. In there, I was able to create three partitions. If the
partitions are big enough (larger than the FAT16 2GB limit), the
partition type will be set to FAT32. And that will undoubtedly
help with the final WinXP partition.

So I put up with the xfdisk initial limitation of making the
partitions hidden. I did the install to C:, where the C: for
FreeDOS was made the last partition. That's so WinXP can be
placed on the first partition.

Next, I booted into FreeDOS (from the hard drive, no CD used).
Because the C: partition currently has the active (boot) flag,
it's the one that boots.

Once in FreeDOS, you can use

edit C:\FDOS\BIN\XFDISK.INI

and the "edit" program even accepts mouse input. You put a "#"
character in front of the "/AUTOHIDE" line, to comment it out.
Then save and quit. To review that the file change actually
occurred, you can use

type C:\FDOS\BIN\XFDISK.INI

and the text file will be spewed to the screen.

Once autohide has been disabled, you can make the
first two partitions visible. When you press F3 in XFDISK
to quit, it will ask whether you want to update the partition
table and you can answer yes.

On the next reboot of FreeDOS from the hard drive, now you
can do "C:", "D:", or "E:" to navigate to one of the three
partitions.

The only remaining mystery, is getting a CDROM driver to work.
FreeDOS could not access the virtual CD in VPC2007. When I
made my MSDOS diskette a few years ago, I added a CD driver
to it, and that allowed me to use the CDROM drive. FreeDOS
does have a driver, but it doesn't detect the virtual CDROM
for some reason.

That isn't a killer issue, if you have some other environment
where you can copy the contents of the WinXP CDROM to partition
D:. For example, I also used a Ubuntu CD, and I could copy
files in that environment if needed.

So it looks like FreeDOS is a step in the right direction. At
least I got it to boot. And boot from the hard drive. Moving
the hard drive from one machine to another, it may still
continue to work, as long as the disk controller is using
a standard operating mode. (Let's hope your laptop
is old enough to not be stuck using AHCI.)

Paul

Re: Loading Win XP
 

On 23/12/2011 17:00, Paul wrote:
> David wrote:
>
>>
>> Hi Paul,
>>
>> Thank you very much for your reply, and the time and trouble to give
>> the info.
>>
>> The laptop does not have a floppy, but I do have a copy of Hirens boot
>> disc that can boot into "mini XP", but I would need to burn an ISO of
>> that to the new hard drive somewhere ?
>>
>> Thanks again , and seasons greetings
>>
>>
>> David
>
> I did some testing of FreeDOS in a virtual machine. I use VPC2007
> within a WinXP environment, for testing things.
>
> I was able to install FreeDOS, using the FreeDOS base installer.
> (In a virtual machine, you create a virtual 16GB hard drive, and
> that's what the virtual machine is installing to, not a physical
> disk as such.)
>
> This is my final partition configuration.
>
> http://img72.imageshack.us/img72/1738/xfdisk.gif
>
> The problem with the FreeDOS package, is it's insistence on
> creating hidden partitions, for the "non C:" partitions.
>
> When using the FreeDOS installer CD, there is a program called
> "xfdisk" which controls disk formatting and partitioning type
> stuff. In there, I was able to create three partitions. If the
> partitions are big enough (larger than the FAT16 2GB limit), the
> partition type will be set to FAT32. And that will undoubtedly
> help with the final WinXP partition.
>
> So I put up with the xfdisk initial limitation of making the
> partitions hidden. I did the install to C:, where the C: for
> FreeDOS was made the last partition. That's so WinXP can be
> placed on the first partition.
>
> Next, I booted into FreeDOS (from the hard drive, no CD used).
> Because the C: partition currently has the active (boot) flag,
> it's the one that boots.
>
> Once in FreeDOS, you can use
>
> edit C:\FDOS\BIN\XFDISK.INI
>
> and the "edit" program even accepts mouse input. You put a "#"
> character in front of the "/AUTOHIDE" line, to comment it out.
> Then save and quit. To review that the file change actually
> occurred, you can use
>
> type C:\FDOS\BIN\XFDISK.INI
>
> and the text file will be spewed to the screen.
>
> Once autohide has been disabled, you can make the
> first two partitions visible. When you press F3 in XFDISK
> to quit, it will ask whether you want to update the partition
> table and you can answer yes.
>
> On the next reboot of FreeDOS from the hard drive, now you
> can do "C:", "D:", or "E:" to navigate to one of the three
> partitions.
>
> The only remaining mystery, is getting a CDROM driver to work.
> FreeDOS could not access the virtual CD in VPC2007. When I
> made my MSDOS diskette a few years ago, I added a CD driver
> to it, and that allowed me to use the CDROM drive. FreeDOS
> does have a driver, but it doesn't detect the virtual CDROM
> for some reason.
>
> That isn't a killer issue, if you have some other environment
> where you can copy the contents of the WinXP CDROM to partition
> D:. For example, I also used a Ubuntu CD, and I could copy
> files in that environment if needed.
>
> So it looks like FreeDOS is a step in the right direction. At
> least I got it to boot. And boot from the hard drive. Moving
> the hard drive from one machine to another, it may still
> continue to work, as long as the disk controller is using
> a standard operating mode. (Let's hope your laptop
> is old enough to not be stuck using AHCI.)
>
> Paul


Hi Paul,

Wow. All this help.

Thanks for this info, and the link to the FreeDos ISO.

I thought that an installer would need to be installed to enable Win XP
installation....


Best wishes

David

Re: Loading Win XP
 

>
> Sounds like you need to shop at www.frys.com for a new machine. Or,
> visit your local Costco -- which I think is actually the better option.
>
> If your laptop is so old as to not support USB boot devices, _and_ has a
> dead optical drive controller and a beat up HDD, it sounds as if you can
> get a far better machine that is new for not much more than you are
> about to pour into the old machine that still won't work very well after
> you get it going again.
>
> I completely agree with your trepidation to move to Win7, I too resist
> the call to migrate that way. I run XP Pro, and my wife has a Vista box
> that I don't even like to be in the same room with. My issue isn't even
> that Vista sucks from an operating standpoint, it sucks for me because
> the familiarity with the GUI is so changed that I cannot find my way
> around. Win7 is supposed to be more stable and therefore a better
> operating system, but the familiarity issues remain. Even with WinXP, I
> have the GUI set to Windows Classic...

Hi Jeff,

I have two newer laptops running Win 7.

Win 7 does not run some stuff I want to run, and whilst OracleVM can do
it, the solution is not entirely satisfactory.

Also, I do not want to use the newer laptops in the car recording from
the EOBD port.

best regards

David