![]() |
Charging Fuji FInepix F610 without Cradle?
Hi, I recently bought this older Fuji F610 camera used and it came
with a charging dock, but without the 5v adapter to use the dock. I did buy a np-40 thin lithium battery and a cheap little AC wall charger that just plugs right into the wall with no cord that will charge the battery- But I was wondering if I did find a generic 5V (+ polarity) adapter that fit, could it be plugged directly into the camera's ac outlet or even the dock's ac outlet (if the male end of the adapter cord fits) to charge the unit? Or, would it be that if you can plug./fit the new adapter's 5v plug into the camera directly, would that only power the camera for use tethered to the cord, or would it in fact charge the battery within- or should you not even place the battery within the camera if you connect it to the ac adapter, ie, would it damage the battery? If I can find a generic 5v adapter whose cord fits the female ports (+ polarity on the dock's port) on the camera and/or the dock, would it make any difference plugging the adapter into the dock or directly into the camera? I'm nervous about damaging the camera either way, but am curious about the options. I can still go back to taking the battery out of the camera and charging it with the little wall charger if there's no other option for this older camera. And finding the original adapter for the cradle is impossible. The cradle was made in Japan, as was the camera, and there are no such parts for it on the internet. Thanks for any advice |
Re: Charging Fuji FInepix F610 without Cradle?
weft2 wrote:
> > Hi, I recently bought this older Fuji F610 camera used and it came > with a charging dock, but without the 5v adapter to use the dock. I > did buy a np-40 thin lithium battery and a cheap little AC wall > charger that just plugs right into the wall with no cord that will > charge the battery- But I was wondering if I did find a generic 5V (+ > polarity) adapter that fit, could it be plugged directly into the > camera's ac outlet or even the dock's ac outlet (if the male end of > the adapter cord fits) to charge the unit? > > Or, would it be that if you can plug./fit the new adapter's 5v plug > into the camera directly, would that only power the camera for use > tethered to the cord, or would it in fact charge the battery within- > or should you not even place the battery within the camera if you > connect it to the ac adapter, ie, would it damage the battery? > > If I can find a generic 5v adapter whose cord fits the female ports (+ > polarity on the dock's port) on the camera and/or the dock, would it > make any difference plugging the adapter into the dock or directly > into the camera? > > I'm nervous about damaging the camera either way, but am curious about > the options. I can still go back to taking the battery out of the > camera and charging it with the little wall charger if there's no > other option for this older camera. And finding the original adapter > for the cradle is impossible. The cradle was made in Japan, as was the > camera, and there are no such parts for it on the internet. > > Thanks for any advice I found the "owner's manual" ["FinePixF610.pdf" (5052KB)] to the Fuji "FinePix F610" digicam, here: [PDF] FinePix F610 Manual <http://downloads.fotosource.com/public/camera_manuals/Fuji/DigitalCameras/FinePixF610.pdf> Relevant excerpts: Page 13 - "1 CHARGING THE BATTERY DC IN 5V (power input) socket 2 Check that the camera is switched off. Plug the AC power adapter connector into the DC IN 5V socket on the camera and then plug the adapter itself into the main power outlet. The self-timer lamp lights (blue) and battery charging begins. When charging is completed, the self-timer lamp switches off. · Full recharging times for completely depleted battery (At an ambient temperature of +21°C to +25°C/+69.8°F to +77°F) NP-40: Approx. 2 hours ! Charging times increase at low temperatures. ! If the self-timer lamp blinks during charging, a charging error has occurred and the battery cannot be charged. If this occurs, see P.98. ! Switching the camera on during charging interrupts the charging. ! You can charge the battery more quickly by using the BC-65 Battery Charger (sold separately) (.P.92). Using the AC Power Adapter Use the AC power adapter to avoid losing power at inconvenient times, such as when you are downloading photographed images to your computer. Using the AC power adapter also allows you to take pictures and playback images without worrying about depleting the battery. · Compatible AC power adapters AC-5VW/AC-5VH/AC-5VS/AC-5VHS ! Use only the FUJIFILM products listed on the left. ! See P.94 for notes on using the AC power adapter. ! Only connect or disconnect the AC power adapter when the camera is switched off. Connecting or disconnecting the AC power adapter while the camera is switched on temporarily interrupts the power supply to the camera, so that images or movies being shot at the time are not recorded. Failing to switch the camera off first can also result in damage to the xD-Picture Card or malfunctions during PC connection. ! The shape of the plug and socket-outlet depends on the country of use." ---- Page 92 - "Accessories Guide" <edited> "· Battery Charger BC-65 Quickly charges the rechargeable battery. The BC-65 reduces charging time to approximately 90 minutes (for the NP-40). The Battery adapter should be used when the NP-40 is being charged. The battery adaptor is supplied with the BC-65. · Rechargeable Battery NP-40 A Lithium-ion slimline rechargeable battery. To charge the battery using the Battery Charger BC-65, the battery adapter supplied with the battery charger is required. · AC Power Adapter AC-5VH/AC-5VHS Use the AC-5VH/AC-5VHS when you want to take pictures or playback images for long periods or when the FinePix F610 is connected to a personal computer. * The shape of the AC power adapter, the plug and socket outlet depend on the country." <edited> "Notes on the Power Supply" <edited> "Charging the Battery · You can charge the battery using the camera and the AC power adapter (supplied). · The NP-40 can be charged at ambient temperatures between 0°C and +40°C (+32°F and +104°F). At an ambient temperature of +23°C (+73°F), it takes approximately 2 hours to charge a fully depleted NP-40 battery. · You should charge the NP-40 at an ambient temperature between +10°C and +35°C (+50°F and +95°F). If you charge the NP-40 at a temperature outside this range, charging takes longer because the performance of the NP-40 is impaired. · You cannot charge the NP-40 at temperatures of 0°C (+32°F) or below. · You can also use the optional Battery Charger BC-65 to charge the NP-40. When charging, use the NP-40 battery adapter supplied with the BC-65 (Refer to the Owner’s Manual for details). · The NP-40 can be charged using the BC-65 Battery Charger at ambient temperatures between 0°C to +40°C (+32°F to +104°F). At an ambient temperature of +23°C (+73°F), it takes approximately 90 minutes to charge a fully depleted NP-40 battery. · You should charge the NP-40 at an ambient temperature between +10°C to +35°C (+50°F to +95°F). If you charge the NP-40 at a temperature outside this range, charging takes longer because the performance of the NP-40 is impaired. · The NP-40 does not need to be fully discharged or exhausted flat before being charged. · The NP-40 may feel warm after it has been charged or immediately after being used. This is perfectly normal. · Do not recharge a fully charged NP-40. Battery Life At normal temperatures, the NP-40 can be used at least 300 times. If the time for which the NP-40 provides power shortens markedly, this indicates that the NP-40 has reached the end of its effective life and should be replaced." ---- Page 95 - "Notes on the Power Supply' <edited> "AC Power Adapter" "Use only the AC-5VW AC Power Adapter with your FinePix F610 Digital Camera. The use of other AC power adapters may result in damage to your camera. · The AC Power Adapter is only intended for indoor use. · Plug the connection cord plug securely into the DC input terminal of the FUJIFILM Digital camera. · Turn off the power switch of the FUJIFILM Digital camera before disconnecting the connection cord from the FUJIFILM Digital camera’s DC input terminal. To disconnect, take hold of the plug and pull it out (do not disconnect it by pulling on the cord). · Do not use the AC power adapter with any device except the specified device. · During use, the AC power adapter will become hot to touch, but this is normal. · Do not disassemble the AC power adapter. Doing so could be dangerous. · Do not use the AC power adapter in a place with high temperature and high humidity. · Do not drop or subject the AC power adapter to strong shocks. · The AC power adapter may emit a humming noise, but this is normal. · If used near a radio, the AC power adapter may cause static, so play the radio in a distant place. . Very occasionally, DC output will be prevented by the operation of the internal protection circuit. In this event, unplug the AC-5VW AC power adapter from the power socket for a few moments and then plug it in again. This will restore DC output. Specifications (AC-5VW) Power Supply AC 100V to 240V,50/60Hz Rated Input Capacity 13W(U.S.A.and Canada) 0.08A to 0.2A(other countries) Rated Output DC 5.0V 1.5A Temperature During Use 0°C to +40°C (+32°F to +104°F) Storage Temperature –10°C to +70°C (+14°F to +158°F) Dimensions (MAX.) 40 mm × 21 mm × 79 mm (1.6 in. × 0.8 in. × 3.1 in.) (W × H × D) Mass (Weight) Approx. 110 g (3.9 oz.) (excluding power cable) * These specifications are subject to change without notice." Good luck and happy hunting! -- Cordially, John Turco <jtur@concentric.net> Marie's Musings <http://fairiesandtails.blogspot.com> |
| All times are GMT. The time now is 08:03 PM. |
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.