ap group vlan
 

Hello everyone,


I'm trying to assign a separate interface (VLAN) to the same SSID on
different APs. For this I have defined a new dynamic interface with a
new vlan, I also defined an additional AP group has the same default
SSID but changing the interface that is assigned. I took an AP and
I've assigned to that group, but when a client is associated on that
AP, controller ignores the new interface and keeps it in the interface
definied at SSID at default group.
can everybody help me ?

it seems i am alwys on the management interface segment
i ve a 4402 wlc
i did everything as
ap group vlan feature is enabled..

i also checked this guide but did not help
http://www.cisco.com/application/pdf...-vlans-wlc.pdf

danny