|
Re: Cisco WLC (AIR-WLC2006-K9) Serial Cable
Hamzah Khan wrote:
> I have also tried using Wireshark to sniff any packets, but it doesn't > seem to be sending anything out. :( Did you plug everything in to a hub or a switch? For best results with dumb hardware and Wireshark, tcpdump, etc. always use a hub. I keep a couple of four ports hubs lying around for just such rare occasions. -Gary |
Re: Cisco WLC (AIR-WLC2006-K9) Serial Cable
On 13 Feb, 17:30, Hamzah Khan <ham...@removethis.hamzahkhan.com>
wrote: > On Sat, 13 Feb 2010 06:30:23 +0000, Gary wrote: > > Hamzah Khan wrote: > > >> I have also tried using Wireshark to sniff any packets, but it doesn't > >> seem to be sending anything out. :( > > > Did you plug everything in to a hub or a switch? For best results with > > dumb hardware and Wireshark, tcpdump, etc. always use a hub. I keep a > > couple of four ports hubs lying around for just such rare occasions. > > > -Gary > > Well, I had it connected directly to the machine using a crossover cable, > this should be pretty much the same as using a hub should it not? yes. |
| All times are GMT. The time now is 05:54 AM. |
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.