Re: Routing between Primary and Seconday IP addresses
> I am using a Cisco 871 router. The internal interface is configured with a primary IP address of 192.168.1.1 and a
> secondary IP address of 10.0.0.1. I also have an Internet facing interface that gets it's IP address from the ISP's DHCP
> 72.x.x.x.x represents the DHCP address on my external interface.
> 192.168.0.x represents the internal network or LAN.
> 10.0.0.0 represents a PAT forward to a firewall from the External interface.
What interfaces contain the 192.168 and 10.* IP addresses ? Some BVI
I am not sure you want to "route" between the two. You may have to
replicate your IP NAT commands to have the last argument the 10.*
interface instead of the Dialer interface and add the apprpriate IP NAT
inside/outside commands to the interface definitions to "link" the two
I haven't done this so not sure it will work.
To route beween two subnets in my case:
I have BVI 10 with 10.0.0.1/16
and Fast/Internet 4 with 10.1.0.1/16
I added "ip route 10.1.0.0 255.255.0.0 fa 4 permanent" to the config.
It appears to work, but have not tested all possible convolutions.
|All times are GMT. The time now is 04:31 PM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.