Velocity Reviews

Velocity Reviews (http://www.velocityreviews.com/forums/index.php)
-   Cisco (http://www.velocityreviews.com/forums/f27-cisco.html)
-   -   Cisco router: WAN connection succeeded but not able to access to internet (http://www.velocityreviews.com/forums/t708211-cisco-router-wan-connection-succeeded-but-not-able-to-access-to-internet.html)

lga775 12-10-2009 05:48 AM

WAN connection succeeded but not able to access to internet.

Router settings:

router#sh run
Building configuration...

Current configuration : 2403 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router
!
boot system flash c3640-ik8s-mz.122-11.T10.bin
enable secret 5 $1$kMCC$syen.xDNh5LXlv.ZJCXu1.
enable password password
!
ip subnet-zero
!
!
ip domain name cisco_dhcp
ip name-server 192.168.0.1
ip dhcp excluded-address 192.168.0.1 192.168.0.25
!
ip dhcp pool dpool1
import all
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 192.168.0.1
!
vpdn enable
!
vpdn-group 1
request-dialin
protocol pppoe
!
!
!
!
voice call carrier capacity active
!
!
!
!
!
!
!
!
!
mta receive maximum-recipients 0
!
!
!
!
interface Ethernet0/0
description ADSL LAN Interface
ip address 192.168.0.3 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
no ip mroute-cache
half-duplex
no cdp enable
!
interface Ethernet0/1
description ADSL WAN Interface
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip accounting output-packets
ip nat outside
no ip mroute-cache
half-duplex
pppoe enable
pppoe-client dial-pool-number 1
no cdp enable
!
interface Dialer1
description ADSL WAN Dialer
mtu 1492
ip address negotiated
no ip unreachables
ip nat outside
encapsulation ppp
ip route-cache flow
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname ****@streamyx
ppp chap password 0 *****
ppp pap sent-username ***** password 0 *****
ppp ipcp dns request accept
ppp ipcp address accept
!
router rip
version 2
passive-interface Ethernet0/1
network 192.168.0.0
network 192.168.1.0
!
ip default-gateway 219.93.218.177
ip nat inside source list 1 interface Ethernet0/1 overload
ip nat inside source list 10 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 Ethernet0/1
ip route 0.0.0.0 0.0.0.0 Ethernet0/0
no ip http server
!
!
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit 0.0.0.0 192.168.0.255
access-list 1 permit 0.0.0.0 255.255.255.0
access-list 10 permit 10.10.10.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
!
snmp-server community public RO
snmp-server enable traps tty
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
password password
login
!
!
end


PPP negotiation DEBUG:
VPDN event DEBUG:

*Mar 1 04:14:59.358: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/
1, changed state to up
*Mar 1 04:15:25.918: Sending PADI: Interface = Ethernet0/1
*Mar 1 04:15:25.918: padi timer expired
*Mar 1 04:15:25.930: PPPoE 0: I PADO L:0002.16e9.3cc2 R:0090.1aa0.63c6 Et0/1
*Mar 1 04:15:27.930: PPPOE: we've got our pado and the pado timer went off
*Mar 1 04:15:27.930: OUT PADR from PPPoE tunnel
*Mar 1 04:15:28.034: PPPoE 5465: I PADS L:0002.16e9.3cc2 R:0090.1aa0.63c6 Et0/1

*Mar 1 04:15:28.034: IN PADS from PPPoE tunnel
*Mar 1 04:15:28.034: Vi1 PPP: Phase is DOWN, Setup
*Mar 1 04:15:28.034: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
*Mar 1 04:15:28.034: PPPoE: Virtual Access interface obtained.
*Mar 1 04:15:28.038: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
o up
*Mar 1 04:15:28.038: Vi1 PPP: Treating connection as a callout
*Mar 1 04:15:28.038: Vi1 PPP: Phase is ESTABLISHING, Active Open
*Mar 1 04:15:28.038: Vi1 PPP: No remote authentication for call-out
*Mar 1 04:15:28.038: Vi1 LCP: O CONFREQ [Closed] id 1 len 14
*Mar 1 04:15:28.038: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.038: Vi1 LCP: MagicNumber 0x0300CD1A (0x05060300CD1A)
*Mar 1 04:15:28.162: Vi1 LCP: I CONFREQ [REQsent] id 234 len 18
*Mar 1 04:15:28.162: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.162: Vi1 LCP: AuthProto PAP (0x0304C023)
*Mar 1 04:15:28.162: Vi1 LCP: MagicNumber 0x12A8A6B7 (0x050612A8A6B7)
*Mar 1 04:15:28.162: Vi1 LCP: O CONFACK [REQsent] id 234 len 18
*Mar 1 04:15:28.162: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.162: Vi1 LCP: AuthProto PAP (0x0304C023)
*Mar 1 04:15:28.162: Vi1 LCP: MagicNumber 0x12A8A6B7 (0x050612A8A6B7)
*Mar 1 04:15:28.162: Vi1 LCP: I CONFACK [ACKsent] id 1 len 14
*Mar 1 04:15:28.162: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.162: Vi1 LCP: MagicNumber 0x0300CD1A (0x05060300CD1A)
*Mar 1 04:15:28.166: Vi1 LCP: State is Open
*Mar 1 04:15:28.166: Vi1 PPP: Phase is AUTHENTICATING, by the peer
*Mar 1 04:15:28.166: Vi1 PAP: Using hostname from interface PAP
*Mar 1 04:15:28.166: Vi1 PAP: Using password from interface PAP
*Mar 1 04:15:28.166: Vi1 PAP: O AUTH-REQ id 1 len 30 from "dlink87@streamyx"
*Mar 1 04:15:28.298: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/
0, changed state to up
*Mar 1 04:15:28.454: Vi1 PAP: I AUTH-ACK id 1 len 5
*Mar 1 04:15:28.454: Vi1 PPP: Phase is FORWARDING, Attempting Forward
*Mar 1 04:15:28.454: Vi1 PPP: Phase is ESTABLISHING, Finish LCP
*Mar 1 04:15:28.454: Vi1 PPP: Phase is UP
*Mar 1 04:15:28.454: Vi1 IPCP: O CONFREQ [Closed] id 1 len 10
*Mar 1 04:15:28.458: Vi1 IPCP: Address 0.0.0.0 (0x030600000000)
*Mar 1 04:15:28.470: Vi1 IPCP: I CONFNAK [REQsent] id 1 len 10
*Mar 1 04:15:28.470: Vi1 IPCP: Address 60.51.95.90 (0x03063C335F5A)
*Mar 1 04:15:28.470: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 10
*Mar 1 04:15:28.470: Vi1 IPCP: Address 60.51.95.90 (0x03063C335F5A)
*Mar 1 04:15:28.482: Vi1 IPCP: I CONFACK [REQsent] id 2 len 10
*Mar 1 04:15:28.482: Vi1 IPCP: Address 60.51.95.90 (0x03063C335F5A)
*Mar 1 04:15:28.530: Vi1 IPCP: I CONFREQ [ACKrcvd] id 46 len 10
*Mar 1 04:15:28.530: Vi1 IPCP: Address 219.93.218.177 (0x0306DB5DDAB1)
*Mar 1 04:15:28.530: Vi1 IPCP: O CONFACK [ACKrcvd] id 46 len 10
*Mar 1 04:15:28.530: Vi1 IPCP: Address 219.93.218.177 (0x0306DB5DDAB1)
*Mar 1 04:15:28.530: Vi1 IPCP: State is Open
*Mar 1 04:15:28.530: Di1 IPCP: Install negotiated IP interface address 60.51.95
.90
*Mar 1 04:15:28.534: Di1 IPCP: Install route to 219.93.218.177
*Mar 1 04:15:28.534: Vi1 IPCP: Add link info for cef entry 219.93.218.177
*Mar 1 04:15:29.454: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Ac
cess1, changed state to up

zh8 02-28-2011 12:41 AM

Hi. So were you able to access internet using the cisco router now?

Quote:

Originally Posted by lga775 (Post 3991229)
WAN connection succeeded but not able to access to internet.

Router settings:

router#sh run
Building configuration...

Current configuration : 2403 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router
!
boot system flash c3640-ik8s-mz.122-11.T10.bin
enable secret 5 $1$kMCC$syen.xDNh5LXlv.ZJCXu1.
enable password password
!
ip subnet-zero
!
!
ip domain name cisco_dhcp
ip name-server 192.168.0.1
ip dhcp excluded-address 192.168.0.1 192.168.0.25
!
ip dhcp pool dpool1
import all
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 192.168.0.1
!
vpdn enable
!
vpdn-group 1
request-dialin
protocol pppoe
!
!
!
!
voice call carrier capacity active
!
!
!
!
!
!
!
!
!
mta receive maximum-recipients 0
!
!
!
!
interface Ethernet0/0
description ADSL LAN Interface
ip address 192.168.0.3 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
no ip mroute-cache
half-duplex
no cdp enable
!
interface Ethernet0/1
description ADSL WAN Interface
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip accounting output-packets
ip nat outside
no ip mroute-cache
half-duplex
pppoe enable
pppoe-client dial-pool-number 1
no cdp enable
!
interface Dialer1
description ADSL WAN Dialer
mtu 1492
ip address negotiated
no ip unreachables
ip nat outside
encapsulation ppp
ip route-cache flow
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname ****@streamyx
ppp chap password 0 *****
ppp pap sent-username ***** password 0 *****
ppp ipcp dns request accept
ppp ipcp address accept
!
router rip
version 2
passive-interface Ethernet0/1
network 192.168.0.0
network 192.168.1.0
!
ip default-gateway 219.93.218.177
ip nat inside source list 1 interface Ethernet0/1 overload
ip nat inside source list 10 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 0.0.0.0 0.0.0.0 Ethernet0/1
ip route 0.0.0.0 0.0.0.0 Ethernet0/0
no ip http server
!
!
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 permit 0.0.0.0 192.168.0.255
access-list 1 permit 0.0.0.0 255.255.255.0
access-list 10 permit 10.10.10.0 0.0.0.255
dialer-list 1 protocol ip permit
no cdp run
!
snmp-server community public RO
snmp-server enable traps tty
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
password password
login
!
!
end


PPP negotiation DEBUG:
VPDN event DEBUG:

*Mar 1 04:14:59.358: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/
1, changed state to up
*Mar 1 04:15:25.918: Sending PADI: Interface = Ethernet0/1
*Mar 1 04:15:25.918: padi timer expired
*Mar 1 04:15:25.930: PPPoE 0: I PADO L:0002.16e9.3cc2 R:0090.1aa0.63c6 Et0/1
*Mar 1 04:15:27.930: PPPOE: we've got our pado and the pado timer went off
*Mar 1 04:15:27.930: OUT PADR from PPPoE tunnel
*Mar 1 04:15:28.034: PPPoE 5465: I PADS L:0002.16e9.3cc2 R:0090.1aa0.63c6 Et0/1

*Mar 1 04:15:28.034: IN PADS from PPPoE tunnel
*Mar 1 04:15:28.034: Vi1 PPP: Phase is DOWN, Setup
*Mar 1 04:15:28.034: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
*Mar 1 04:15:28.034: PPPoE: Virtual Access interface obtained.
*Mar 1 04:15:28.038: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
o up
*Mar 1 04:15:28.038: Vi1 PPP: Treating connection as a callout
*Mar 1 04:15:28.038: Vi1 PPP: Phase is ESTABLISHING, Active Open
*Mar 1 04:15:28.038: Vi1 PPP: No remote authentication for call-out
*Mar 1 04:15:28.038: Vi1 LCP: O CONFREQ [Closed] id 1 len 14
*Mar 1 04:15:28.038: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.038: Vi1 LCP: MagicNumber 0x0300CD1A (0x05060300CD1A)
*Mar 1 04:15:28.162: Vi1 LCP: I CONFREQ [REQsent] id 234 len 18
*Mar 1 04:15:28.162: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.162: Vi1 LCP: AuthProto PAP (0x0304C023)
*Mar 1 04:15:28.162: Vi1 LCP: MagicNumber 0x12A8A6B7 (0x050612A8A6B7)
*Mar 1 04:15:28.162: Vi1 LCP: O CONFACK [REQsent] id 234 len 18
*Mar 1 04:15:28.162: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.162: Vi1 LCP: AuthProto PAP (0x0304C023)
*Mar 1 04:15:28.162: Vi1 LCP: MagicNumber 0x12A8A6B7 (0x050612A8A6B7)
*Mar 1 04:15:28.162: Vi1 LCP: I CONFACK [ACKsent] id 1 len 14
*Mar 1 04:15:28.162: Vi1 LCP: MRU 1492 (0x010405D4)
*Mar 1 04:15:28.162: Vi1 LCP: MagicNumber 0x0300CD1A (0x05060300CD1A)
*Mar 1 04:15:28.166: Vi1 LCP: State is Open
*Mar 1 04:15:28.166: Vi1 PPP: Phase is AUTHENTICATING, by the peer
*Mar 1 04:15:28.166: Vi1 PAP: Using hostname from interface PAP
*Mar 1 04:15:28.166: Vi1 PAP: Using password from interface PAP
*Mar 1 04:15:28.166: Vi1 PAP: O AUTH-REQ id 1 len 30 from "dlink87@streamyx"
*Mar 1 04:15:28.298: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/
0, changed state to up
*Mar 1 04:15:28.454: Vi1 PAP: I AUTH-ACK id 1 len 5
*Mar 1 04:15:28.454: Vi1 PPP: Phase is FORWARDING, Attempting Forward
*Mar 1 04:15:28.454: Vi1 PPP: Phase is ESTABLISHING, Finish LCP
*Mar 1 04:15:28.454: Vi1 PPP: Phase is UP
*Mar 1 04:15:28.454: Vi1 IPCP: O CONFREQ [Closed] id 1 len 10
*Mar 1 04:15:28.458: Vi1 IPCP: Address 0.0.0.0 (0x030600000000)
*Mar 1 04:15:28.470: Vi1 IPCP: I CONFNAK [REQsent] id 1 len 10
*Mar 1 04:15:28.470: Vi1 IPCP: Address 60.51.95.90 (0x03063C335F5A)
*Mar 1 04:15:28.470: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 10
*Mar 1 04:15:28.470: Vi1 IPCP: Address 60.51.95.90 (0x03063C335F5A)
*Mar 1 04:15:28.482: Vi1 IPCP: I CONFACK [REQsent] id 2 len 10
*Mar 1 04:15:28.482: Vi1 IPCP: Address 60.51.95.90 (0x03063C335F5A)
*Mar 1 04:15:28.530: Vi1 IPCP: I CONFREQ [ACKrcvd] id 46 len 10
*Mar 1 04:15:28.530: Vi1 IPCP: Address 219.93.218.177 (0x0306DB5DDAB1)
*Mar 1 04:15:28.530: Vi1 IPCP: O CONFACK [ACKrcvd] id 46 len 10
*Mar 1 04:15:28.530: Vi1 IPCP: Address 219.93.218.177 (0x0306DB5DDAB1)
*Mar 1 04:15:28.530: Vi1 IPCP: State is Open
*Mar 1 04:15:28.530: Di1 IPCP: Install negotiated IP interface address 60.51.95
.90
*Mar 1 04:15:28.534: Di1 IPCP: Install route to 219.93.218.177
*Mar 1 04:15:28.534: Vi1 IPCP: Add link info for cef entry 219.93.218.177
*Mar 1 04:15:29.454: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Ac
cess1, changed state to up



All times are GMT. The time now is 07:05 PM.

Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.