Re: Logging Events and Debugs
you may check what kind of options the 'logging' command have to offer.
debug-trace Enable logging of redirect debug-trace output to syslog
Mark C wrote:
> I have a remote site whose connetivity keeps bouncing. It has a Cisco ASA
> 5505. When it goes down, I am unable to ping it or connect to it in any way
> from our central office.
> The ISP has run tests repeatedly and says the circuit is "clean." I have
> also checked the system uptime on the ASA and it does not seem to be a power
> I opened a ticket with TAC, but made the mistake of phrasing it as a VPN
> tunnel bouncing problem. Now they are fixated on capturing VPN debugs, but
> I think it's probably more of a system-wide problem, perhaps hardware.
> Anyway, my question is as follows: TAC is telling me I need to capture the
> logs via a TERM MON session. But since it's a remote site, and since I
> cannot connect when the circuit goes down, there is no way for me to do
> Is there a way to capture logs to a buffer, or even a syslog server, so I
> can give TAC what they want and move on?
> I have actually set up a syslog server, but for some reason it seems to be
> capturing everything -- not just debugs. I can't figure out how to make it
> just send debugs to the syslog server.
|All times are GMT. The time now is 12:26 PM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.