Asa/pix Nat0 Rule - Help
Hello clever people, newbie to the site..
Having problems trying to configure my ASA, I have it set to a good standard for users dialing in with the IP-Sec client and it works fine, however recently I have found that I cannot get any IP connectivity through the ASA whilst associated with the Client. the log shows the following message:
no translation group found for udp src outside:172.28.22.241/138 dst inside 172.28.22.255/138.
I should add that I have a dhcp scope set up for this profile of 172.28.240-255 - which is actually a section of the inside network the device sits on. I know this is something to do with Nat0 rule and it used to work but I cannot understand what to configure to allow traffic through for a nominal DHCP scope.
Any help wise peeps???
|All times are GMT. The time now is 04:33 PM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.