No connectivity @ wireless connection status after W XP SP2 instal
 

Desktop - Updated to Wiindows XP Service Pak 2, and have been unable to
access internet since update via wireless network connection. Worked great
prior to update.

Messaage: Limited or no connectivity. You might not be able to access the
Internet or some network resources. This problem occured because the network
did not assign a network addresss to the computer.

Click Repair - get - Windows could not finish repairing the problem because
the following action cannot be completed: Renewing your IP address.

Shows - Speed 54.0 Mbps

Signal strength = 5 bars

Note: I am sure the modem, router & wireless are functional, because I am
able to connect with a different computer -laptop - this one.

This has got to be an easy fix, but I am baffled.

Re: No connectivity @ wireless connection status after W XP SP2 instal
 

reboot the router

reinstall/update the wireless driver for the affected computer.
sounds like you have a working computer to do this with.

last step is to reset the router to factor defaults.

On Sun, 20 Jul 2008 23:54:03 -0700, lena lane <lena
lane@discussions.microsoft.com> wrote:

>Desktop - Updated to Wiindows XP Service Pak 2, and have been unable to
>access internet since update via wireless network connection. Worked great
>prior to update.
>
>Messaage: Limited or no connectivity. You might not be able to access the
>Internet or some network resources. This problem occured because the network
>did not assign a network addresss to the computer.
>
>Click Repair - get - Windows could not finish repairing the problem because
>the following action cannot be completed: Renewing your IP address.
>
>Shows - Speed 54.0 Mbps
>
>Signal strength = 5 bars
>
>Note: I am sure the modem, router & wireless are functional, because I am
>able to connect with a different computer -laptop - this one.
>
>This has got to be an easy fix, but I am baffled.
--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/e...ts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
http://digitalmediaphile.wordpress.com

Re: No connectivity @ wireless connection status after W XP SP2 instal
 

Hi
Hi
If the reboot did not help go carefully over the Wireless setting.
Your computer seem Not to be able to connect to the Router.
My Wireless does not work - http://www.ezlan.net/wireless.html
Wireless Basic Configuration - http://www.ezlan.net/Wireless_Config.html
Wireless Security - http://www.ezlan.net/Wireless_Security.html
Jack (MS, MVP-Networking)

"lena lane" <lena lane@discussions.microsoft.com> wrote in message
news:C9E0FD57-DE48-482A-B16E-49214A7E222B@microsoft.com...
> Desktop - Updated to Wiindows XP Service Pak 2, and have been unable to
> access internet since update via wireless network connection. Worked great
> prior to update.
>
> Messaage: Limited or no connectivity. You might not be able to access the
> Internet or some network resources. This problem occured because the
> network
> did not assign a network addresss to the computer.
>
> Click Repair - get - Windows could not finish repairing the problem
> because
> the following action cannot be completed: Renewing your IP address.
>
> Shows - Speed 54.0 Mbps
>
> Signal strength = 5 bars
>
> Note: I am sure the modem, router & wireless are functional, because I am
> able to connect with a different computer -laptop - this one.
>
> This has got to be an easy fix, but I am baffled.