Velocity Reviews

Velocity Reviews (http://www.velocityreviews.com/forums/index.php)
-   VOIP (http://www.velocityreviews.com/forums/f35-voip.html)
-   -   Call Issues CISCO 2610 (http://www.velocityreviews.com/forums/t623046-call-issues-cisco-2610-a.html)

sadzas 06-30-2008 02:33 PM

Call Issues CISCO 2610
 
Hi Everyone!

I'm trying to connect a Mitel phone (registered on ICP 3300) to X-Lite (Registered - I think - on Cisco 2610)..

When I dialing from both sides, this show up... (Debug dialpeer):

01:27:45.851: Inside dpMatchCore:
01:27:45.855: destination pattn: 700 expanded string: 700
01:27:45.855: Inside dpMatchCore:
01:27:45.855: destination pattn: 220 expanded string: 220
01:27:45.855: Inside dpMatchCore:
01:27:45.855: destination pattn: 220 expanded string: 220
01:27:45.855: dpAssociateIncomingPeer_T null source route label
01:27:45.867: Inside dpMatchPeersMoreArg
01:27:45.867: dpMatchPeersMoreArg: Match Dest. pattern; called (700)
01:27:45.871: Inside dpMatchCore:
01:27:45.871: destination pattn: 700 expanded string: 700
01:27:45.871: MatchNextPeer: Peer 100 matched
01:27:45.871: dpMatchPeersMoreArg: Result=0 after MATCH_ORIGINATE

700: X-Lite number
220: Mitel Phone number
100: Dial Peer (Cisco 2610)

Show Running-config...
...
!
voice class codec 1
codec preference 1 g729r8
codec preference 2 g726r16
codec preference 3 g726r24
codec preference 4 g726r32
codec preference 5 g711alaw
codec preference 6 g711ulaw
!
!
dial-peer voice 1 voip
session protocol sipv2
!
dial-peer voice 100 voip
destination-pattern 700
voice-class codec 1
session protocol sipv2
session target ipv4:xx.xx.xx.xx
!
!
dial-peer voice 101 voip
destination-pattern 220
voice-class codec 1
session protocol sipv2
session target ipv4:xx.xx.xx.xx
!
...

I Can't establish the comunication... anyone knows why??

This is what happens. Having both correctly Dial-peer acounts, Router says he can't find the dialed number..

X-Lite <> CISCO 2600 <> MITEL <> Mitel 5235

X-Lite: 700
Mitel 5235: 220

From both sides, I dialed the otherwise number and Says Not FOUND! like dial-peer doesn't exists...

Any Idea ??? Thanks


All times are GMT. The time now is 02:50 PM.

Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.