Cisco DHCP Relay Agent - strange thing..
I have worked the whole week to get our new-DHCP Schema working. - No
it works, but i really don't know why...
Catalyst 3550 12G Configuration (Backbone Switch)
ip dhcp relay information trust-all
Interface Vlan 1
....(many other addresses)
ip helper address 192.168.201.254
Interface VLAN 610
I want that our DHCP Server (Win2003) serves our Clients with
10.10.6.x/24 IP Adresses. (and later 192.168.199.x/24, and other
The server has an interface in VLAN 610 and the DHCP-Server is bounded
to that Interface.
When I use the configuration above, it works fine (The clients get
10.10.6.x/24 IPs and 192.168.199.x/24 IPs).
But if I change the primary IP-Adress of VLAN 1 Interface to e.g.
192.168.200.3/24, the clients get no lease.
The leases reach the DHCP-Server, but it does'nt react on the
DHCPDISCOVER (GIADDR ist the primary ip of the Switch).
No DHCPOFFER, no log-file entry, the only chance to ensure, that the
packets reach the server is to use a sniffer, like etheral.
Is this a problem of the Windows 2003 Server or an logical mistake by
Bjoern A. Hoefer
Re: Cisco DHCP Relay Agent - strange thing..
how are your scopes defined ? I believe that with secondary addressing,
you will need a single superscope with a scope inside for each subnet
defined on your interface. So in your case that would mean a suoerscope
with scopes for 10.10.6.0/24, 192.168.200.0/24, 192.168.111.0/24 etc...
We've got answers !
|All times are GMT. The time now is 07:15 PM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.