secondary IP address in an Interface
i have a configuration as below:
ip address 10.10.1.1 255.255.255.0 secondary
ip address 10.10.20.1 255.255.255.0
standby 100 ip 10.10.1.254
standby 100 priority 105
standby 100 preempt
standby 100 authentication password
standby 200 ip 10.10.20.254
standby 200 priority 105
standby 200 preempt
standby 200 authentication password
Will there is any problem with the configuration above?
is it necessary to configure 2x standby in the interface?
I have an user, where it got connected to this vlan.
The can ping out, can surf internet with no problem.
The problem is that other client/user cannot ping this user's IP address.
The user's pc has been confirmed with no 3rd party firewall installed, or any application that block ping request.
Appreciate your expertice.. hope you can give me some valuable advice.
thanks in advance....
|All times are GMT. The time now is 08:33 PM.|
Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.