Site to Site VPN routing - Cisco 1841 to Nortel VPN Router 1010
 

I am trying to connect a Cisco 1841 router to a Nortel VPN Router 1010
via a IPSEC VPN tunnel. I actually have the tunnel up and running.
My problem is that I cannot figure out how to tell the Cisco Router to
route traffic from its private network to the private network on the
Nortel Router. The Nortel Router seems to just route traffic to the
Cisco Router's public interface and it works. If I put a static route
in the Cisco Router to route to the Nortel Router's public interface,
I get nothing. Any help would be appreciated.

Re: Site to Site VPN routing - Cisco 1841 to Nortel VPN Router 1010
 

On Sep 21, 1:46 pm, peachma...@yahoo.com wrote:
> I am trying to connect a Cisco 1841 router to a Nortel VPN Router 1010
> via a IPSEC VPN tunnel. I actually have the tunnel up and running.
> My problem is that I cannot figure out how to tell the Cisco Router to
> route traffic from its private network to the private network on the
> Nortel Router.


take a look at IPSec Virtual Tunnel Interface

http://cco.cisco.com/en/US/products/...html#wp1027195

Static Virtual Tunnel Interfaces figure 1

Notice the static route pointing to the tunnel interface