Velocity Reviews

Velocity Reviews (http://www.velocityreviews.com/forums/index.php)
-   Cisco (http://www.velocityreviews.com/forums/f27-cisco.html)
-   -   dot1q vlan question (http://www.velocityreviews.com/forums/t486170-dot1q-vlan-question.html)

news.sbcglobal.net 03-22-2007 02:18 AM

dot1q vlan question
 
In the following specific scenario
Switch A port X connects to switch B port Y
port A is configured with the following commands
switchport access vlan 2

port Y uses default port setting (no specific vlan configuration)

Is my understanding correct?
1. ingress of port X adds the vlan tag to incoming frame
2. egress of port X strips the vlan tag from outgoing frame

Thanks



Brad 03-22-2007 03:27 AM

Re: dot1q vlan question
 
On Mar 21, 10:18 pm, "news.sbcglobal.net" <myrecei...@pacbell.net>
wrote:
> In the following specific scenario
> Switch A port X connects to switch B port Y
> port A is configured with the following commands
> switchport access vlan 2
>
> port Y uses default port setting (no specific vlan configuration)
>
> Is my understanding correct?
> 1. ingress of port X adds the vlan tag to incoming frame
> 2. egress of port X strips the vlan tag from outgoing frame
>
> Thanks


tagging only happens on trunks. port x and port y are access links
hence no tagging happens at all.



All times are GMT. The time now is 11:35 AM.

Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.