![]() |
Unable to setup my Wireless Networking
I have a NetComm NB5540 Wireless Firewall Router. I use Bigpond ADSL as my
ISP Provider. I have four Computers which include a laptop. I use an Alcatel SpeedTouch Modem with a single port that Telstra provided me to connect to the Internet. The Alcatel then connects to the Wlan port on the NetComm Router. The manual says to use PPOE if you are an ADSL customer. This mode just does not work. However if I take the use any other option it works fine. Is anyone aware of any issues involved here? |
Re: Unable to setup my Wireless Networking
Hi
I am Not familiar with your specific Hardware, but your Modem is probably a Modem/Router Combo. If it is so you have to connect the Modem to a regular port on the NetComm NB5540 and use the Wireless Router as a switch with an access point. May be this can Help: http://www.ezlan.net/router_AP.html Jack (MVP-Networking). "Gerard" <gvallada@bigpond.net.au> wrote in message news:BA0353DE-F192-4A97-B64A-D711FB3DC5FF@microsoft.com... > I have a NetComm NB5540 Wireless Firewall Router. I use Bigpond ADSL as my > ISP Provider. I have four Computers which include a laptop. I use an Alcatel > SpeedTouch Modem with a single port that Telstra provided me to connect to > the Internet. The Alcatel then connects to the Wlan port on the NetComm > Router. The manual says to use PPOE if you are an ADSL customer. This mode > just does not work. However if I take the use any other option it works fine. > Is anyone aware of any issues involved here? |
| All times are GMT. The time now is 12:28 AM. |
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.