AP local Auhenticator
 

Hi guys,
I have a 1200 Aironet that i need to configure as a local
authenticator, (using local RADIUS authentication) i tried cisco
documentations, and i am not getting forced to authenticate. Does the
AP local authenticator forces users to autheticate through a usename
and password?

Re: AP local Auhenticator
 

On 31 Jan 2007 08:56:19 -0800, "Andy" <dandashi@hotmail.com> wrote:

~ Hi guys,
~ I have a 1200 Aironet that i need to configure as a local
~ authenticator, (using local RADIUS authentication) i tried cisco
~ documentations, and i am not getting forced to authenticate. Does the
~ AP local authenticator forces users to autheticate through a usename
~ and password?

The local authenticator can be used only for wireless clients, and only
for LEAP, EAP-FAST and MAC authentication.

Here's the drill for LEAP:

http://www.cisco.com/en/US/products/...801c0912.shtml

(this based on old IOS; in current IOS, the SSID config is global under "dot11 ssid")

Hth,

Aaron

Re: AP local Auhenticator
 

Hi Aaron,
I have this document, and i went through the GUI and CLI, but still i
was not getting forced to authenticate. I will post my configuration
soon, thank you.