HTTP AAA authentication problem
Does anyone have a clue as to what is going on? I have aaa radius
authentication setup on a Cat 3500XL switch and it works great for
console and telnet access. For web/http access though I'm having
problems. It'll ask me for the username/pass credentials, authenticate
it, and take me to the web page as it should. However when I try to do
anything on the web page, it'll ask me to authenticate again.
Frustrating & like I said, doesn't do this on console or vty/telnet
On the radius server, what I think are the correct
service-type=shell-user and cisco-avpair=sh:priv-lvl=15 have been set.
Here is the relevant config info on this switch. If anyone can point me
in the right direction or help, its much appreciated.
On Cisco Catalyst 3500XL version 12.0(5)WC11
aaa authentication login default group radius enable
aaa authorization exec default group radius
ip http authentication aaa
radius-server host ********** auth-port 1812 acct-port 1813
radius-server timeout 30
radius-server key ***********
|All times are GMT. The time now is 08:05 PM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.