Velocity Reviews

Velocity Reviews (http://www.velocityreviews.com/forums/index.php)
-   Cisco (http://www.velocityreviews.com/forums/f27-cisco.html)
-   -   6509 Booting in rommon (http://www.velocityreviews.com/forums/t39012-6509-booting-in-rommon.html)

JC 05-01-2005 11:24 PM
6509 Booting in rommon
 
I asked this a few months back but got called off to another site. So
here is some more information. The unit always goes into rommon mode
when it is powered down and back up. Here is what is going on.

System Bootstrap, Version 6.1(3)
Copyright (c) 1994-2000 by cisco Systems, Inc.

Testing lower main memory - data equals address
Testing lower main memory - checkerboard
Testing lower main memory - inverse checkerboard
Clearing lower 16K memory for cache initialization
Clearing bss
Reading monitor variables from NVRAM
Warning: Rommon NVRAM area is corrupted. Initialize the area to default
values

Enabling interrupts
Initializing TLB
Initializing cache
Initializing required TLB entries
Initializing main memory
Sizing NVRAM
Initializing PCMCIA controller
Exiting init
c6k_sup2 processor with 131072 Kbytes of main memory

rommon 1 > sh mod

monitor: command "sh" not found
rommon 2 > boot

Self decompressing the image :
################################################## ################################################## ########################################]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(20)E, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 25-Oct-03 09:55 by hqluong
Image text-base: 0x40020F90, data-base: 0x40978000


00:00:02: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
00:00:03: %OIR-6-CONSOLE: Changing console ownership to route processor



System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
Cat6k-MSFC2 platform with 131072 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image :
################################################## ################################################## ########################################]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(20)E, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 25-Oct-03 09:18 by hqluong
Image text-base: 0x40008F90, data-base: 0x4184E000

cisco WS-C6509 (R7000) processor (revision 1.0) with 112640K/18432K
bytes of memory.
Processor board ID SCA0318003V
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3
Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).
%Error opening tftp://255.255.255.255/network-confg (Socket error)
%Error opening tftp://255.255.255.255/cisconet.cfg (Socket error)
SETUP: new interface Vlan1 placed in "shutdown" state
SETUP: new interface GigabitEthernet1/1 placed in "shutdown" state
SETUP: new interface GigabitEthernet1/2 placed in "shutdown" state
SETUP: new interface FastEthernet4/1 placed in "shutdown" state
SETUP: new interface FastEthernet4/2 placed in "shutdown" state
SETUP: new interface FastEthernet4/3 placed in "shutdown" state
SETUP: new interface FastEthernet4/4 placed in "shutdown" state
SETUP: new interface FastEthernet4/5 placed in "shutdown" state
SETUP: new interface FastEthernet4/6 placed in "shutdown" state
SETUP: new interface FastEthernet4/7 placed in "shutdown" state
SETUP: new interface FastEthernet4/8 placed in "shutdown" state
SETUP: new interface FastEthernet4/9 placed in "shutdown" state
SETUP: new interface FastEthernet4/10 placed in "shutdown" state
SETUP: new interface FastEthernet4/11 placed in "shutdown" state
SETUP: new interface FastEthernet4/12 placed in "shutdown" state
SETUP: new interface FastEthernet4/13 placed in "shutdown" state
SETUP: new interface FastEthernet4/14 placed in "shutdown" state
SETUP: new interface FastEthernet4/15 placed in "shutdown" state
SETUP: new interface FastEthernet4/16 placed in "shutdown" state
SETUP: new interface FastEthernet4/17 placed in "shutdown" state
SETUP: new interface FastEthernet4/18 placed in "shutdown" state
SETUP: new interface FastEthernet4/19 placed in "shutdown" state
SETUP: new interface FastEthernet4/20 placed in "shutdown" state
SETUP: new interface FastEthernet4/21 placed in "shutdown" state
SETUP: new interface FastEthernet4/22 placed in "shutdown" state
SETUP: new interface FastEthernet4/23 placed in "shutdown" state
SETUP: new interface FastEthernet4/24 placed in "shutdown" state
SETUP: new interface FastEthernet4/25 placed in "shutdown" state
SETUP: new interface FastEthernet4/26 placed in "shutdown" state
SETUP: new interface FastEthernet4/27 placed in "shutdown" state
SETUP: new interface FastEthernet4/28 placed in "shutdown" state
SETUP: new interface FastEthernet4/29 placed in "shutdown" state
SETUP: new interface FastEthernet4/30 placed in "shutdown" state
SETUP: new interface FastEthernet4/31 placed in "shutdown" state
SETUP: new interface FastEthernet4/32 placed in "shutdown" state
SETUP: new interface FastEthernet4/33 placed in "shutdown" state
SETUP: new interface FastEthernet4/34 placed in "shutdown" state
SETUP: new interface FastEthernet4/35 placed in "shutdown" state
SETUP: new interface FastEthernet4/36 placed in "shutdown" state
SETUP: new interface FastEthernet4/37 placed in "shutdown" state
SETUP: new interface FastEthernet4/38 placed in "shutdown" state
SETUP: new interface FastEthernet4/39 placed in "shutdown" state
SETUP: new interface FastEthernet4/40 placed in "shutdown" state
SETUP: new interface FastEthernet4/41 placed in "shutdown" state
SETUP: new interface FastEthernet4/42 placed in "shutdown" state
SETUP: new interface FastEthernet4/43 placed in "shutdown" state
SETUP: new interface FastEthernet4/44 placed in "shutdown" state
SETUP: new interface FastEthernet4/45 placed in "shutdown" state
SETUP: new interface FastEthernet4/46 placed in "shutdown" state
SETUP: new interface FastEthernet4/47 placed in "shutdown" state
SETUP: new interface FastEthernet4/48 placed in "shutdown" state


Press RETURN to get started!


00:00:33: RP: Currently running ROMMON from S (Gold) region
00:01:02: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(20)E, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 25-Oct-03 09:18 by hqluong
00:00:37: SP: SP: Currently running ROMMON from S (Gold) region
00:00:39: %C6K_PLATFORM-SP-4-CONFREG_BREAK_ENABLED: The default factory
setting for config register is 0x2102.It is advisable to retain 1 in
0x2102 as it prevents returnin.

00:01:02: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
cold start
00:01:02: %SYS-6-BOOTTIME: Time taken to reboot after reload = 445
seconds
00:01:01: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(20)E, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 25-Oct-03 09:55 by hqluong
00:01:03: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:03: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:03: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:05: %C6KENV-SP-4-PSFANFAILED: the fan in power supply 1 has
failed
00:01:16: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimum Online
Diagnostics...
00:01:20: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
00:01:20: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are
now online
00:01:35: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum Online
Diagnostics...
00:01:44: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
00:01:44: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are
now online
Router>sh mod
Mod Ports Card Type Model
Serial No.
--- ----- -------------------------------------- ------------------
-----------
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE
SAD050707ZU
4 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
SAL05084X6T

Mod MAC addresses Hw Fw Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
1 0004.c0f8.9e76 to 0004.c0f8.9e77 2.2 6.1(3) 12.1(20)E
Ok
4 0004.de61.f760 to 0004.de61.f78f 2.0 5.4(2) 8.2(0.58)TFW
Ok

Mod Sub-Module Model Serial Hw
Status
--- --------------------------- --------------- --------------- -------
-------
1 Policy Feature Card 2 WS-F6K-PFC2 SAD05080T6L 1.3
Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD05080KHG 1.2
Ok

Mod Online Diag Status
--- -------------------
1 Pass
4 Pass
Router>

Nick 05-02-2005 12:25 AM
Re: 6509 Booting in rommon
 
Check the following

http://www.cisco.com/en/US/customer/...80231f74.shtml

JC wrote:
> I asked this a few months back but got called off to another site. So
> here is some more information. The unit always goes into rommon mode
> when it is powered down and back up. Here is what is going on.
>
> System Bootstrap, Version 6.1(3)
> Copyright (c) 1994-2000 by cisco Systems, Inc.
>
> Testing lower main memory - data equals address
> Testing lower main memory - checkerboard
> Testing lower main memory - inverse checkerboard
> Clearing lower 16K memory for cache initialization
> Clearing bss
> Reading monitor variables from NVRAM
> Warning: Rommon NVRAM area is corrupted. Initialize the area to default
> values
>
> Enabling interrupts
> Initializing TLB
> Initializing cache
> Initializing required TLB entries
> Initializing main memory
> Sizing NVRAM
> Initializing PCMCIA controller
> Exiting init
> c6k_sup2 processor with 131072 Kbytes of main memory
>
> rommon 1 > sh mod
>
> monitor: command "sh" not found
> rommon 2 > boot
>
> Self decompressing the image :
> ################################################## ################################################## ########################################]
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(20)E, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Sat 25-Oct-03 09:55 by hqluong
> Image text-base: 0x40020F90, data-base: 0x40978000
>
>
> 00:00:02: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
> 00:00:03: %OIR-6-CONSOLE: Changing console ownership to route processor
>
>
>
> System Bootstrap, Version 12.1(3r)E2, RELEASE SOFTWARE (fc1)
> Copyright (c) 2000 by cisco Systems, Inc.
> Cat6k-MSFC2 platform with 131072 Kbytes of main memory
>
> Download Start
> !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!
> Download Completed! Booting the image.
> Self decompressing the image :
> ################################################## ################################################## ########################################]
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(20)E, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Sat 25-Oct-03 09:18 by hqluong
> Image text-base: 0x40008F90, data-base: 0x4184E000
>
> cisco WS-C6509 (R7000) processor (revision 1.0) with 112640K/18432K
> bytes of memory.
> Processor board ID SCA0318003V
> R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3
> Cache
> Last reset from power-on
> X.25 software, Version 3.0.0.
> Bridging software.
> 1 Virtual Ethernet/IEEE 802.3 interface(s)
> 48 FastEthernet/IEEE 802.3 interface(s)
> 2 Gigabit Ethernet/IEEE 802.3 interface(s)
> 381K bytes of non-volatile configuration memory.
>
> 16384K bytes of Flash internal SIMM (Sector size 512K).
> %Error opening tftp://255.255.255.255/network-confg (Socket error)
> %Error opening tftp://255.255.255.255/cisconet.cfg (Socket error)
> SETUP: new interface Vlan1 placed in "shutdown" state
> SETUP: new interface GigabitEthernet1/1 placed in "shutdown" state
> SETUP: new interface GigabitEthernet1/2 placed in "shutdown" state
> SETUP: new interface FastEthernet4/1 placed in "shutdown" state
> SETUP: new interface FastEthernet4/2 placed in "shutdown" state
> SETUP: new interface FastEthernet4/3 placed in "shutdown" state
> SETUP: new interface FastEthernet4/4 placed in "shutdown" state
> SETUP: new interface FastEthernet4/5 placed in "shutdown" state
> SETUP: new interface FastEthernet4/6 placed in "shutdown" state
> SETUP: new interface FastEthernet4/7 placed in "shutdown" state
> SETUP: new interface FastEthernet4/8 placed in "shutdown" state
> SETUP: new interface FastEthernet4/9 placed in "shutdown" state
> SETUP: new interface FastEthernet4/10 placed in "shutdown" state
> SETUP: new interface FastEthernet4/11 placed in "shutdown" state
> SETUP: new interface FastEthernet4/12 placed in "shutdown" state
> SETUP: new interface FastEthernet4/13 placed in "shutdown" state
> SETUP: new interface FastEthernet4/14 placed in "shutdown" state
> SETUP: new interface FastEthernet4/15 placed in "shutdown" state
> SETUP: new interface FastEthernet4/16 placed in "shutdown" state
> SETUP: new interface FastEthernet4/17 placed in "shutdown" state
> SETUP: new interface FastEthernet4/18 placed in "shutdown" state
> SETUP: new interface FastEthernet4/19 placed in "shutdown" state
> SETUP: new interface FastEthernet4/20 placed in "shutdown" state
> SETUP: new interface FastEthernet4/21 placed in "shutdown" state
> SETUP: new interface FastEthernet4/22 placed in "shutdown" state
> SETUP: new interface FastEthernet4/23 placed in "shutdown" state
> SETUP: new interface FastEthernet4/24 placed in "shutdown" state
> SETUP: new interface FastEthernet4/25 placed in "shutdown" state
> SETUP: new interface FastEthernet4/26 placed in "shutdown" state
> SETUP: new interface FastEthernet4/27 placed in "shutdown" state
> SETUP: new interface FastEthernet4/28 placed in "shutdown" state
> SETUP: new interface FastEthernet4/29 placed in "shutdown" state
> SETUP: new interface FastEthernet4/30 placed in "shutdown" state
> SETUP: new interface FastEthernet4/31 placed in "shutdown" state
> SETUP: new interface FastEthernet4/32 placed in "shutdown" state
> SETUP: new interface FastEthernet4/33 placed in "shutdown" state
> SETUP: new interface FastEthernet4/34 placed in "shutdown" state
> SETUP: new interface FastEthernet4/35 placed in "shutdown" state
> SETUP: new interface FastEthernet4/36 placed in "shutdown" state
> SETUP: new interface FastEthernet4/37 placed in "shutdown" state
> SETUP: new interface FastEthernet4/38 placed in "shutdown" state
> SETUP: new interface FastEthernet4/39 placed in "shutdown" state
> SETUP: new interface FastEthernet4/40 placed in "shutdown" state
> SETUP: new interface FastEthernet4/41 placed in "shutdown" state
> SETUP: new interface FastEthernet4/42 placed in "shutdown" state
> SETUP: new interface FastEthernet4/43 placed in "shutdown" state
> SETUP: new interface FastEthernet4/44 placed in "shutdown" state
> SETUP: new interface FastEthernet4/45 placed in "shutdown" state
> SETUP: new interface FastEthernet4/46 placed in "shutdown" state
> SETUP: new interface FastEthernet4/47 placed in "shutdown" state
> SETUP: new interface FastEthernet4/48 placed in "shutdown" state
>
>
> Press RETURN to get started!
>
>
> 00:00:33: RP: Currently running ROMMON from S (Gold) region
> 00:01:02: %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(20)E, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Sat 25-Oct-03 09:18 by hqluong
> 00:00:37: SP: SP: Currently running ROMMON from S (Gold) region
> 00:00:39: %C6K_PLATFORM-SP-4-CONFREG_BREAK_ENABLED: The default factory
> setting for config register is 0x2102.It is advisable to retain 1 in
> 0x2102 as it prevents returnin.
>
> 00:01:02: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
> cold start
> 00:01:02: %SYS-6-BOOTTIME: Time taken to reboot after reload = 445
> seconds
> 00:01:01: %SYS-SP-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(20)E, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Sat 25-Oct-03 09:55 by hqluong
> 00:01:03: %OIR-SP-6-INSPS: Power supply inserted in slot 1
> 00:01:03: %OIR-SP-6-INSPS: Power supply inserted in slot 2
> 00:01:03: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
> 00:01:05: %C6KENV-SP-4-PSFANFAILED: the fan in power supply 1 has
> failed
> 00:01:16: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimum Online
> Diagnostics...
> 00:01:20: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
> 00:01:20: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are
> now online
> 00:01:35: %DIAG-SP-6-RUN_MINIMUM: Module 4: Running Minimum Online
> Diagnostics...
> 00:01:44: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
> 00:01:44: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are
> now online
> Router>sh mod
> Mod Ports Card Type Model
> Serial No.
> --- ----- -------------------------------------- ------------------
> -----------
> 1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE
> SAD050707ZU
> 4 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45
> SAL05084X6T
>
> Mod MAC addresses Hw Fw Sw
> Status
> --- ---------------------------------- ------ ------------ ------------
> -------
> 1 0004.c0f8.9e76 to 0004.c0f8.9e77 2.2 6.1(3) 12.1(20)E
> Ok
> 4 0004.de61.f760 to 0004.de61.f78f 2.0 5.4(2) 8.2(0.58)TFW
> Ok
>
> Mod Sub-Module Model Serial Hw
> Status
> --- --------------------------- --------------- --------------- -------
> -------
> 1 Policy Feature Card 2 WS-F6K-PFC2 SAD05080T6L 1.3
> Ok
> 1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAD05080KHG 1.2
> Ok
>
> Mod Online Diag Status
> --- -------------------
> 1 Pass
> 4 Pass
> Router>
>

JC 05-02-2005 12:50 AM
Re: 6509 Booting in rommon
 
That is not for the same card as what I have installed. Though it could
be the same issue a bad crystal. I just want to rule out everything
else.

Chris Marva 05-03-2005 02:13 PM
Re: 6509 Booting in rommon
 
"JC" <joseph.clark@gmail.com> wrote in news:1114995036.191731.74690
@f14g2000cwb.googlegroups.com:

> That is not for the same card as what I have installed. Though it could
> be the same issue a bad crystal. I just want to rule out everything
> else.
>
>


We had seen this a couple of times. I assume you're using native, not
hybrid. Once the thing is booted, do:

sho ver to see the RP config register.

remote command switch sho ver to see the SP config register.

If they don't match, set them so they do match and reboot
(at least, that is the problem that we had, the cfg regs
were not synced).

hope this helps,

c

Frreak 05-04-2005 03:36 AM
Re: 6509 Booting in rommon
 
Pls post the show version...
The default config-register value should be 0x2102... If iti s anything
else. then this may be the reason.. or else...ur NVRAM might be
corrupted for which u may have to contact cisco TAC......

Cheers,
Naveen B

gordokan 05-04-2005 08:01 AM
Re: 6509 Booting in rommon
 
Have you set the configuration register to the normal value of 0x2102?
This would normally regain the correct boot sequence.

JC 05-05-2005 05:19 PM
Re: 6509 Booting in rommon
 
The config register is set to 0x2102.

Simon Stoll 05-08-2005 08:49 PM
Re: 6509 Booting in rommon
 
As you are using hybrid, there are two config-registers, one on the SUP and
one on the MSFC. Both should be 0x2102. The one on the MSFC you see easily
with "sh ver", the other on the SUP you can see with "remote command switch
show version"

Simon



"JC" <joseph.clark@gmail.com> schrieb im Newsbeitrag
news:1115313563.043553.70550@f14g2000cwb.googlegro ups.com...
> The config register is set to 0x2102.
>

JC 05-09-2005 07:59 PM
Re: 6509 Booting in rommon
 
Router#remote command switch show version
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(20)E, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 25-Oct-03 09:55 by hqluong
Image text-base: 0x40020F90, data-base: 0x40978000

ROM: System Bootstrap, Version 6.1(3)
BOOTLDR: c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(20)E, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)

Router uptime is 2 minutes
Time since Router switched to active is 2 minutes
System returned to ROM by error - a Software forced crash, PC
0x401252BC at 13:12:34 UTC Mon May 2 2005
System image file is "bootflash:c6sup22-ps-mz.121-20.E.bin"

cisco WS-C6509 (R7000) processor (revision 1.0) with 112640K/18432K
bytes of memory.
Processor board ID SCA0318003V
R7000 CPU at 250Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3
Cache
Last reset from power-on
X.25 software, Version 3.0.0.
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

32768K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x8000

JC 05-18-2005 03:29 AM
Re: 6509 Booting in rommon
 
It has gotten to the point where my boss and I have decided to hire
someone to look into this. So if any of you are interested contact me
at joseph.clark@gmail.com.


All times are GMT. The time now is 07:58 PM.

Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.