[newbie] Please, help me to configure....
I'have buy a switch (2950T) and a firewall (506E) for my network and I'have
some problem to configure the firewall.
My network is like this (example) :
Internet Router : 10.10.10.13
(Outside : 10.10.10.150 / Inside : 192.168.1.1)
(with two VLAN - VLAN1 = public network / VLAN2 = private network)
In the first VLAN I have this servers :
Machine 1 (web)
Public IP : 10.10.10.151
Private IP : 192.168.1.2 (linked to the second VLAN)
Machine 2 (web)
Public IP : 10.10.10.152
Private IP : 192.168.1.3 (linked to the second VLAN)
In the second VLAN I have this servers :
Machine 3 (sql server)
Private IP : 192.168.1.4
Machine 4 (sql server)
Private IP : 192.168.1.5
Private IP : 192.168.1.6
And the second Machine 1 & Machine 2 ethernet interface
How to configure my firewall to establishing inbound connectivity (on each
public IP) through my firewall ?
How to configure my firewall (nat, pat, no translattion or others...) so
that my machine use my internet router as gateway ?
I'am a CISCO beginner so if my configuration is imperfected thanks to
|All times are GMT. The time now is 09:56 AM.|
Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.