PIX 506e Site to site VPN
I am new to Cisco's PIX and to VPN but this is the following setup.
Internal 192.168.x.x/24 ---> PIX Firewall (aaa.bbbb.cccc.dddd) ---> router
506e 192.168.77.x ee.ff.gg. |
Central site |
Internal 10.10.x.x/24 ---> PIX Firewall (aaa.bbbb.cccc.dddd) ---> router
From the remote site i have done a no nat from 192.168.x.x to 10.10.x.x. I used the site to site VPN wizard on the PIX 506e.
When i try to ping between the VPN nothing happens and i get have only got #send errors when i do a show crypto ipsec sa
does VPN not like being NATED?
How do we know that there is a connections to the central site?
all the security settings are default
|All times are GMT. The time now is 03:50 AM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.