Velocity Reviews

Velocity Reviews (http://www.velocityreviews.com/forums/index.php)
-   Cisco (http://www.velocityreviews.com/forums/f27-cisco.html)
-   -   Cisco 1721 ATM nightmare (http://www.velocityreviews.com/forums/t369168-cisco-1721-atm-nightmare.html)

podzol 09-07-2006 03:33 PM

Cisco 1721 ATM nightmare
 
Hi
I am trying to get a 1721 atm interface to work with BT and I am not having much luck....... all I am getting is the Vi3 protocol not coming up and a continuous debug about "PPP: Authorization NOT required"

Here's the relavant bits of config any help gratfully received:

Current configuration : 4378 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname hostname
!
logging queue-limit 100
enable secret 5 password
!
username root password 7 password
aaa new-model
!
!
aaa authentication login VTY local-case
aaa session-id common
ip subnet-zero
no ip source-route
!
!
ip domain name .com
!
no ip bootp server
ip inspect max-incomplete low 200
ip inspect max-incomplete high 400
ip inspect one-minute low 50
ip inspect one-minute high 100
ip inspect name OUTBOUNDTRAFFIC tcp
ip inspect name OUTBOUNDTRAFFIC udp
ip inspect name OUTBOUNDTRAFFIC ftp
ip inspect name OUTBOUNDTRAFFIC icmp
ip audit notify log
ip audit po max-events 100
!
!
!!
interface ATM0
ip address dhcp
ip mtu 1500
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Ethernet0
no ip address
shutdown
!
interface FastEthernet0
ip address 10.x.x.x 255.255.255.0
ip nat inside
speed auto
!
interface Dialer1
ip address 217.x.x.x 255.255.255.248
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap callout
ppp chap hostname hostname
ppp chap password 7 password
!
!
ip nat inside source list NAT2 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
!
!
!
!
dialer-list 1 protocol ip permit
!

line con 0
line aux 0
line vty 0 4
access-class TELNETSSH in
login authentication VTY
transport input telnet ssh
!
no scheduler allocate
end

Interface IP-Address OK? Method Status Protocol

Virtual-Access3 unassigned YES unset up down
ATM0 unassigned YES manual up up
ATM0.1 unassigned YES unset up up
Dialer0 217.x.x.x YES manual up up


All times are GMT. The time now is 01:13 AM.

Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.