![]() |
Vpn site-to-site with same network address
Hi.
I need to establish a VPN site-to-site connection from a 10.0.x.x network and a 10.0.5.x network. Is it possible? How can I configure my PIX (7.2) to enable the tunneling? Tnx. |
Re: Vpn site-to-site with same network address
In article <1157455069.548731.288840@i3g2000cwc.googlegroups. com>,
Darkon <mattia.beraldo@airc.it> wrote: >I need to establish a VPN site-to-site connection from a 10.0.x.x >network and a 10.0.5.x network. >Is it possible? Yes. >How can I configure my PIX (7.2) to enable the tunneling? I'm fairly sure cisco.com has examples of configuring for VPN tunnels between overlapping networks. |
Re: Vpn site-to-site with same network address
I have already searched.
No configuration examples is similar to mi scenario. I'll try to search again tomorrow. Tnx ;-) |
Re: Vpn site-to-site with same network address
In article <1157560167.683002.190180@i3g2000cwc.googlegroups. com>,
Darkon <darkon95@yahoo.it> wrote: >I have already searched. >No configuration examples is similar to mi scenario. >I'll try to search again tomorrow. site:cisco.com pix overlapping networks configuration guide http://www.cisco.com/en/US/products/...html#wp1113571 That's the 6.3 documentation on how to set it all up. The most important command of the bunch, static, is documented for 7.2 at http://www.cisco.com/univercd/cc/td/....htm#wp1175431 |
| All times are GMT. The time now is 01:10 PM. |
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.