VoFR codec problem
 

Trying to force certain dial-peers to use a different codec. The
following config we have setup in a lab. 2 MC3810's. 2 phones.
Simulated WAN circuit using a serial cable between the 3810's with a
DLCI of 231.

Router A:
dial-peer voice 1 pots
destination-pattern 10
port 1/1

dial-peer voice 2 pots
destination-pattern 11
port 2/1

dial-peer voice 101 vofr
destination-pattern 2.
session target Serial0 231

dial-peer voice 102 vofr
destination-pattern 20
session target Serial0 231
codec g711ulaw

Router B:
dial-peer voice 1 pots
destination-pattern 20
port 1/1

dial-peer voice 2 pots
destination-pattern 21
port 2/1

dial-peer voice 101 vofr
destination-pattern 1.
session target Serial0 231

dial-peer voice 102 vofr
destination-pattern 10
session target Serial0 231
codec g711ulaw

When I try to call 10, it does not default to the codec I specified
and vice-versa. It continues to use g729ar8. I verify this when I do a
"show voice ports summary". Any ideas? Thanks in advance.