Cisco 837 > Pix > 2600
We are shortly getting an ADSL line assigned to our test network. We have a
setup like this...
Cisco 837 > PIX > 2600 >2600 >SUBNET1
I would like to be able to place my public IP's under the subnets leaving
the core devices with the internal addresses.
I know we obviosuly need to assign one IP to our gateway, how would other
public traffic be routed through, I have read various configs but can see
nothing regarding routing the public traffic to the subnets.
|All times are GMT. The time now is 12:35 AM.|
Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.