tacacs+ snmp accouning
i have installed a tacacs server to do all console and tty accounting and
Does anybody know how to configure tacacs authorization for snmp. I need
this to monitor the changes witch are done by
snmp for example from cisco view !.
I need that for IOS and Catos.
Re: tacacs+ snmp accouning
I don't think you can get tacacs Auth for snmp writes. I did a quick
search of the docs and nothing jumped out.
I would suggest setting up a syslog server and have your
routers/switches write back to it.
For windows www.kiwisyslog.com has a great syslog server, linux has a
syslog server built-in.
gets via the RW snmp server community statment are recoreded in the
logging buffer in IOS as shown below:
"%SYS-4-SNMP_WRITENET: SNMP WriteNet request. Writing current
CatIos gives something like:
"SYS-6:Global block changed by SNMP/"
You might need to make some changes in both the IOS and CatIOS to make
sure certain "logging" and "facility" levels are adjusted to log the
changes. The CatIos is a little more tricky.
Another safe guard would be to limit snmp access to the device via an
access list. This way only a specific ip address can access via snmp.
"Oliver Schlosser" <email@example.com> wrote in message news:<firstname.lastname@example.org>...
> Hello all,
> i have installed a tacacs server to do all console and tty accounting and
> Does anybody know how to configure tacacs authorization for snmp. I need
> this to monitor the changes witch are done by
> snmp for example from cisco view !.
> I need that for IOS and Catos.
|All times are GMT. The time now is 11:56 PM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.