mandatory output binding?
 

the outputs of a component being instantiated can be left 'open' if the
vector range is defined

entity E is
port map (
O: out std_logic_vector(1 to 10);


However, the simulatior enforces me to bind the O signal for the component
declared as:

entity E is
port map (
I: in std_logic_vector;
O: out std_logic_vector; -- assumed to be the I'range
...

e: entity E is (O => open, ) -- error here

Just a bug in my simulator?

Re: mandatory output binding?
 

On Sat, 2 Jul 2005 19:52:59 +0300, "valentin tihomirov"
<spam@abelectron.com> wrote:


>However, the simulatior enforces me to bind the O signal for the component
>declared as:
>
> entity E is
> port map (
> I: in std_logic_vector;
> O: out std_logic_vector; -- assumed to be the I'range
> ...
>
> e: entity E is (O => open, ) -- error here
>
>Just a bug in my simulator?

No, I don't think so. If you don't bind the unconstrained
array then it remains unconstrained within the entity/architecture,
and that makes no sense. For example, what would happen if you
tried to make use of "O'length" within the architecture?

By the way Valentin, I think that I and many others here would
appreciate an occasional acknowledgement of whether our
responses to you are helpful or not. Many of your questions
are quite intriguing and I'm sure people will continue to
answer them, but our answers seem to go into a black hole :-(
--
Jonathan Bromley, Consultant

DOULOS - Developing Design Know-how
VHDL, Verilog, SystemC, Perl, Tcl/Tk, Verification, Project Services

Doulos Ltd. Church Hatch, 22 Market Place, Ringwood, BH24 1AW, UK
Tel: +44 (0)1425 471223 mail:jonathan.bromley@doulos.com
Fax: +44 (0)1425 471573 Web: http://www.doulos.com

The contents of this message may contain personal views which
are not the views of Doulos Ltd., unless specifically stated.