Differences Webpack 4.2 and 5.x
If I synthesize, translate, map, p&r and generate my design with 5.x
versions of XILINX Webpack ISE, I always get configuration problems.
The config. will be load correctly but seems to resetted after a split
This problem not appears if I use Webpack ISE 4.2! *.bit and *.hex
will be produced correctly then.
|All times are GMT. The time now is 09:24 AM.|
Powered by vBulletin®. Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.