Detect MAC address on (remote) NIC ?
# DETECT #
I would like to read out - preferably written to a txt.log - the *burnt-in*
MAC-address of NICS, local or remote. For detecting NICS on an Internet-server,
I need to be able to detect which NIC is *locally* (inbound) connected (and
dump the address in the log) and which NIC is *publicly* (outbound) connected.
Is there software that is able to do this (detect + write to a txt.log) ?
# CONVERT #
Last but not least: how does one convert the MAC's hexadecimal XX:XX...-address
to an 0x1234567890AB address?
I need this for NetOp Remote Control so that I will be able to remotely reboot
the other machine (Wake on LAN MAC Address).
# NAT-router #
Last question: I use Kerio's NAT to issue addresses. I have 2 NICS in the
server, but I find 4 MAC-addresses. Which one do I choose as the one to reboot?
I have 2 physical cards:
- ELNK3 Ethernet Adapter - linked to 10.0.0.150
- Novell 2000 Adapter - linked to 192.168.0.1
Then I have 2 PPP Adapters:
- 18.104.22.168 : this is my public IP address
- and another one, not linked to any address
This last ones are issued by the DHCP server of Kerio. The MAC-address
therefore is probably not *static*. Should I use the ELNK3 card linked to
10.0.0.150 as the MAC-address that is the one that will react on a remote
Thanks in advance for any reply !
|All times are GMT. The time now is 12:33 AM.|
Powered by vBulletin®. Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO ©2010, Crawlability, Inc.